Ultrapurificatoare de apa tip I, II, III, deionizata ID si osmozata RO

Sistem ultraperformant pentru purificare / ultrapurificare apa direct de la robinet

Descriere

Sistem performant complet automat echipat cu toate module necesare funcționării; produce apa filirata; ultrafiltrata, deionizata, osmozata, pura de tip II si ultrapura de tip I, cu alimentare direct de la rețeaua de apă potabilă.
Sistemul de tratare, purificare / ultrapurificare are incorporat un sistem de pre-filtrare si o membrana de osmoza inversa RO.
Apa pura este colectata intr-un rezervor presurizat si este circulata prin sistem de tratare (polishing) de o pompa electronica.
Se poate utiliza apa de tip II de la rezervor sau apa de Tip I de la dispenser cu 0.055 µS/cm, echivalent la 18.2 MΩ x cm, si TOC 3 ppb
Senzor de conductivitate masoara in continuu puritatea apei.
Dispenser cu filtru steril de 0.2 µm indeparteaza bacteriile si endotoxinele, eliminand necesitatea unui ultra filtru aditional.
Faza finala apa este filtrata cu filtru de 0.2 µm

Aplicatii

• Analize generale in laborator
• Preparare solutii tampon
• Spectrofotometre absorbtie atomica AAS
• Sisteme Gaz cromatografe GC
• Sisteme IC
• Sisteme ICP
• Culturi celulare
• Aplicatii cu Pirogene sensibile
• Producere apa grad III
• Control calitatitii industria alimentara
• Biologie moleculara si Micro-moleculara
• Sisteme PCR
• Sisteme HPLC
• Analize TOC

Avantaje

Alimentare direct de la rețeaua de apă potabilă
Rezervor cu capacitate de 10 lit; 30 lit sau de 50 lit
Sistem de circulare / recirculare apa ultrapure in capul de distribuire
Apa poate fi distribuita cu usurinta utilizand dispenserul aparatului
Monitorizare continua a conductivitatii
Manta de protectie la capatul filtrului steril
Producere apei de tip III este de asemenea posibila

Certificate

- Certificat de conformitate
- Certifcat de garantie si post garantie
:: Service autorizat pentru Romania » MultiLab

Solicit oferta personalizata »

Type I and Type II water system

Desktop Water Purification System is able to produce three qualities of water:

- Type I Water (Ultrapure Water)
- Type II Water (Pure Water)
- Osmotized Water
The Autwomatic Plus 1+2 produces and dispenses Type I and Type II water from tap water, with the following characteristics:

Type II Water
Production: 3 - 5 - 10 l/h
Conductivity: < 1 µS/cm
TOC: < 50 ppb
Bacterial content: < 1 ufc/ml

Type I Water
Flow rate: 1.1 l/min
Conductivity: < 0.055 µS/cm
Resistivity: 18.2 MΩ·cm
TOC: < 3 ppb
Bacterial content: < 1 ufc/ml
Endotoxins Free of Pyrogens and nucleases: < 0,03 (IU/ml)

Advantages

Dispensing: The equipment dispenses Type II and Type I Water independently.
Reading device parameters
- Conductivity of the feeding water
- Conductivity of the permeate reverse osmosis’ permeate
- % perfomance of the reverse osmosis module
- Conductivity of the Type II water
- Resistivity of the Type I water
- Temperature of the water
Total control of parameters:
- Hours of installation for each item
- Working hours of each item
- Total liters produced
- Pumps operating hours
Three different types of dispensing:
- Directly by touch. Direct Touch and continuous dispensing
- By volumes delivered. Programmed dispensing volume in milliliters
- On time selection. Dispensation of time programmed in seconds
Conductivity Settings allows fixing the alarm conductivity, according to user's needs work
Security system has a custom password for the user, to access certain features Automatisms Systems available:
- Stop by water cut
- Cleaning osmosis membrane drag combined with conditioning with RO water to extend its life
- Programmable Type I Water Recirculation. Recirculates automatically the water contained in the circuit, ensuring the highest quality of dispensed water
- Inability to dispense water with less than a preset resistivity
Self Test and Preventive maintenance
Software pre-set to perform a scheduled self-check system operation, exercising a constant and effective control of the equipment components and values for monitoring the quality of water produced.
Alerts
- Alerts of the change of consumables
- Alerts for malfunction of the equipment, such as cut of inlet water; measuring probes
Maintenance, sanitizacion and Calibration
The replacement of consumables is very fast, because the cartridges have a quick connect system with anti -drip system.
The system allows the sanitization, using a semi-automatic system.
The software allows to set up and calibrate the conductivity meter by using a certified standard with traceability to the national standards from the German Deutscher Kalibrierdienst (DKD).