Centrifuga cu Racire Refrigerare Incalzire

Centrifuga cu racire digitala programabila Racire pana la -20°C :: Viteza max.16000 RPM :: 16 tuburi de 1,5/2 ml

Refrigerated Centrifuge :: Model Nahita 2816 / producator AuxiLab - Spania


Pret : la cerere


Livrare: 10 - 14 zile lucratoare


Certificat de conformitate


Centru service autorizat de producator


produsul poate fi achizitionat si prin SEAP


solicit oferta personalizata »

Centrifuga digitala cu racire programabila cu sistem integrat de refrigerare , controlata de un microprocesor; potrivita pentru extragerea si purificarea acizilor nucleici, procesarea probelor de sange sau probelor PCR.

Spec.Tehnice:
• capacitate:
*16 posturi pentru tuburi Eppendorf (sau similar) de 2; 1.5; 0.5 sau de 0.2 ml
* Optional: rotor pentru tuburi de 5ml (12x75mm)
• Viteza poate fi setata in RPM sau RCF
• Afisaj pentru vizualizarea vitezei, temperaturii si timpului de operare.
• Domeniu de temperatura: -20°C
• Pre-racire la vitezele de 3000 pana la 6000 rpm
• Gaz de racire Freon ecologic R134A
• Timer setabil intre 0 .. 99 minute sau continuu
• Alarma: semnal acustic la finalizarea programului
• Protectie: intrerupator de siguranta la deschiderea capacului in timpul functionarii
• Dimensiuni 34x55x30 cm
• Greutate: 33 Kg

RPM RCFxg Capacitate x nr. tuburi Cod produs
16000 rpm 19593 rcf 1,5 / 2 ml x 16 52816000

 

Accesorii Optionale
- Rotor pentru tuburi de 5ml (12x75mm)
- Tuburi si microtuburi centrifugale Falcon; Eppendorf, PCR, HTML,.. mai multe »

Pause and starting of the same protocol
Pre-cooling at 3000-6000rpm
Temperature control even with paused rotor
Efficient refrigeration at low temperatures
Protection mechanism if lid is open
Accoustic signal at the end of operation
Speed can be set in rpm or RCF
Maintenace-free induction motor
Capacity 16 Eppendorf tubes of 2/1.5/0.5/0.2mL
Temperature -20 °C to RT
Max. speed 16000rpm
Max. RCF 19593g
Timer 1-99 min
Dimensions 340x550x300mm
Ref.: 52816000

Centrifuga universala cu sistem de racire / incalzire Racire pana la -20°C :: Viteza max.18500 RPM :: tuburi 12x1.5/2.0 ml; 24x1.5/2.0 ml; 36x0,5ml; 10x5ml; 12x10 ml si 6x50 ml

High speed refrigerated centrifuge :: Model MultiFrig 2850 / producator AuxiLab - Spania


Pret : la cerere


Livrare: 10 - 14 zile lucratoare


Certificat de conformitate


Centru service autorizat de producator


produsul poate fi achizitionat si prin SEAP


solicit oferta personalizata »

Centrifuga universala cu cu sistem de racire / incalzire cu posibilitati multiple de adaptare pentru diverse tipuri de tuburi cu capacitati variabile prin inlocuirea rotoarelor si a daptoarelor; recomandata pentru utilizare in laboaratoare de analiza si de cercetare, in unitati profesinale farmaceutice, medicale, in industrie alimentara, etc.

Specificatii Tehnice
• Rotor unghiular fix interschimbabil
• Domeniu de temperatura: –20°C .. +40°C
• Afisare continua valorile parametrilor operationale
• Setarea turatiei / accelerare / decelerare in pasi de 10 rpm
• Functionare in cicluri scurte (pulsuri)
• 10 rampe de accelerare si franare pentru protejarea probelor sensibile
• 10 rampe de decelerare pentru sedimentare optima
• Setare temperatura in pasi de 1°C
• 10 programe predefinite (memorizate)
• Timer cronometric 9ore : 59min : 99sec
• Incinta de centrifugare din otel inoxidabil
• Dispozitiv blocare capac
• Optiune deblocare rapida si manuala a capacului
• Rotoare interschimbabile
• Recunoastere automata a rotorului
• Alarma in cazul aparitiei unor erori de functionare
• Nivel zgomot: ≤65 dB
• Dimensiuni: 61 x 52 x 37 cm
• Greutate: 55 kg

Rotoare unghiulare fixe

RPM RCFxg Capacitate x nr. tuburi cod produs
18500 rpm 25330 rcf 1.5/2.0 ml x 12 92850000
16000 rpm 23210 rcf 1.5/2.0 ml x 24 92850001
13500 rpm 13250 rcf 0,5ml x 36 92850002
16000 rpm 18140 rcf 5ml x 10 92850003
13000 rpm 15120 rcf 10 ml x 12 92850004
12000 rpm 13750 rcf 50 ml x 6 92850005

 

High speed bench-top angle rotor centrifuge especially aimed for its use in several fields such as biology, veterinary, chemistry,genetic engineering or immunology. Thanks to the multiple rotors that can be used, this centrifuge offers a high versatility of usethus being an essential equipment for routine laboratory tasks.
Multifrig centrifuge is manufactured with the most advanced technology to assure a large durability and accurate control of thecentrifugation conditions.

Main Features
Multifrig centrifuge is manufactured with the most advanced technology to assure a large durability and accurate control of the centrifugation conditions:
- Microprocessor controlled digital electronic circuits for an accurateand reliable control of speed, time and RCF
- Maintenance-free induction motor
- Large back-lit LCD display for an easy adjustment and visualizationof centrifugation parameters
- Easy-to-use; provided with a multifunctional single button to set allparameters
- Available different angle rotors (not included) with different capacity and for different type of tubes
- Low noise level ≤65 dB
- Alarm at the end of centrifugation and in case of detection of error
- High performance CFC-free refrigeration system
- Rotor and inner chamber pre-cooling function; down to 0°C in staticmode and lower temperature at 1000 rpm.
- Electronic opening of the lid or manual in case of main supply failure

Safety
External case made of high quality ABS plastic with base made of steel and large solid feet to assure a high sta-bility of the equipment during operation
Inner chamber made of stainless steel and steel safety chamber between inner chamber and external case
Electromechanical lock to avoid opening the lid during operation and safety mechanism that avoids operation ifthe lid is open
Protection system that stops centrifugation in case of over speed and rotor imbalance
Over temperature protection system; if inner temperature is higher than 10°C set temperature, the centrifuge stopsautomatically.
Lid with metallic base and suspension mechanism.

Technical Data
Control panel and adjustable parameters
• Start, stop and lid open buttons
• Multifunction single button to select and adjust all parameters
• Possibility of programming speed (rpm) or RCF (xg)
• Timer up to a maximum of 99 h 59’ 59”
• 10 acceleration rates and 10 deceleration rates to adapt to all kind of samples
• Memory for up to 10 programs
• Pre-cooling function
• Short-spin function
Technical Specifications
• Rotor: fixed angle
• Mx. speed: 18500 rpm
• Max. RCF: 25330 xg
• Timer: 0 .. 99h 59’ 59”
• -20°C .. 40°C
• Pre-cooling function: integrated
• Short spin function
• Acceleration rates: 10 (‹ 35s from zero to max. speed)
• Deceleration rates: 10 (‹ 30s from max. speed to zero)
• Programs: 10
• Noise level: ≤65 dB
• Power: AC 230 V, 50-60 Hz, 15 A
• Dimensiones (LxAxH): 61x52x37 cm
• Weight: 55 Kg
• Product Code 52850000

centrifuga hettich cu racire
Centrifuga programabila cu racire Racire pana la -10°C :: Viteza max. 14000 RPM :: tuburi 24x1.5ml; 24x0.5/0.8ml ; 24x0,2 /0.4ml; 24x2ml; 30x 0,5ml; 20 Criotub x 1,8ml; 20 lame PCR x 1,8ml

Refrigerated Benchtop Centrifuge :: Model M240R / producator Hettich Boeco - Germania


Pret : la cerere


Livrare: 10 - 14 zile lucratoare


Certificat de conformitate


Centru service autorizat de producator


produsul poate fi achizitionat si prin SEAP


solicit oferta personalizata »

Centrifuga cu refrigerare / racire cu viteza mare de rotatie recomandata pentru utilizare in laboaratoare de analiza si de cercetare, in unitati profesinale farmaceutice, medicale, etc. configurabila dupa necesitati cu rotoare interschimbabile cu diverse numarul de posturi, turatia, capacitatea si tipul tuburilor.

Aplicatia
Aplicatii generale, cum ar fi culturile celulare
Separarea celulelor lysate
Procese de precipitare/ purificare ADN
Date tehnice
• Afisaj digital
• Tastatura membrana tactila / soft-touch
• Rotor unghiular interschimbabil (vezi accesorii)
• Domeniu de temperatura -10°C .. +4°C incremente de 1°C
• Racire rapida pre-raceste camera rotorului la temperatura de 4°C in doar 10 minute • Timer (timp reglabil): 0 .. 99 min
• Mod de functionare: continuu
• 4 programe predefinite
• Capac transparent inchidere/deschidere automata
• Viteza centrifugala / rotatie: 14000 RPM / 18626 RCF
• Reglarea vitezei in incrementi de 10 rpm.
• Temperatura / umiditate de operare: 5 .. 40°C / 80% fara condens
• Clasa de protectie: IEC 1010-2-2
• Nivel zgomot: ≤52 dB
• Alimentare: 100 - 240 V :: 50/60 Hz
• Dimensiuni : 260 x 281 x 547mm
• Greutate 28 kg

 

RPM RCFxg Capacitate x nr. tuburi
14000 rpm 18626 rcf 1.5ml x 24
14000 rpm 18626 rcf 0.5/0.8ml x 24
14000 rpm 18626 rcf 0,2 /0.4ml x 24
14000 rpm 18626 rcf 2ml x 24
14000 rpm 17749 rcf 0,5ml x 30
14000 rpm 18407 rcf 1,8ml x 20 Tub Crio
14000 rpm 12490 rcf 1,8ml x 20 lame PCR

 

Rotoare: versatilitate ridicata cu posibilitatii de interschimbare a unui numar mare de rotoare
Ghid selectie Rotoare / Tuburi »

Main Features
The M-240 and M-240R rank among the fastest centrifuges in their class with a maximum speed of 14,000 rpm and an RCF of 18,626; the M-240R also refrigerates quickly: to +4°C with the Fast Cool function in 10 to 15 minutes.
Even thermosensitive samples can be gently centrifuged thanks to highly reliable refrigeration.
Best separation results are guaranteed with the smooth-running, high-performance motor featuring a maintenance-free frequency drive. With the optional autoclavable and aerosol tight accessories, even infectious materials can be processed safely for both the user and the environment.

Advantages
Automatic lid locking
Quick-entry foil keypad
Easy-to-read, digital display
Display of current parameter values
Select key for parameter selection
Impulse key for short centrifuging
Open lid key
RCF key
Twist knob to enter values
RPM in increments of 10
Running time in minutes, max. 99 min
Temperature in increments of 1°C (M-240R)
4 programmable memories

Safety
The M-240 / M-240R conform to safety regulations such as IEC 1010-2-2, all relevant EC standards and DIN norms and have been manufactured under ISO 9001:2000- Lid dropping protection
- Lid locking and holding
- Emergency lid lock release
- Motor overheating protection
- Chamber overheating protection
- Imbalance switch-off
- Standstill indication
- with the refrigerated model M-240R the LED in the Open key lights up with the M-240 the lid opens automatically after the rotor has come to a standstill

Technical Data
Refrigeration
- Infinitely variable setting from –10 °C to +40 °C
- Fast Cool function in 10 - 15 min to +4 °C
- Stand-by mode maintains the set temperature
- Automatic refrigeration switch-off when the lid is opened
Max RPM (speed): 14000 RPM / 18626 RCF
Noise Level: 52 dB (dependent on rotor)
Dimensions (HxWxD): 260 x 281 x 547mm
Weight: 28 kg
Radio interference: EN 55011; ISM class B; EN 55011 ISM class B
Immunity: EN 61000-6-2; EN 61000-6-2

Accessories included in delivery
Rotor 8 x 1.5 / 2 ml
Rotor 4 x strip 8 x 0.2 ml
Adapter set 0.5 ml x 8
Adapter set 0.4 ml x 8
Adapter set 0.2 ml x 8

centrifuga_racire_hettich
Centrifuga pentru microtuburi, tuburi si placi de PCR Racire pana la -20°C :: Viteza max. 15000 RPM :: Rotoare interschimbabile si Tuburi universale

Refrigerated laboratory centrifuge :: Model U-320R / producator Hettich Boeco - Germania


Pret : la cerere


Livrare: 10 - 14 zile lucratoare


Certificat de conformitate


Centru service autorizat de producator


produsul poate fi achizitionat si prin SEAP


solicit oferta personalizata »

Centrifuga cu refrigerare proiectata pentru aplicatii de rutina din laboratoare mici, medii si unitati profesinale farmaceutice, medicale, biotehnologie, chimie analitica, etc. configurabila dupa necesitati cu rotoare interschimbabile cu diverse tipuri de rotoare, numarul de posturi, turatia, capacitatea si tipul tuburilor.
In domeniul vitezelor mici, se utilizeaza eprubete standard cu volumul de pana la 100 ml, placi de microtitrare, eprubete conice cu cap insurubat, eprubete pentru recoltare sange si cito- accesorii; Microtuburile pot fi accelerate la RCF de 21382.
Eprubetele de centrifugare cu volume mai mari (de pana la 85 ml) pot beneficia de extraordinara putere a motorului acestui model; la un RCF de 9418, bacteriile si drojdiile sedimenteaza usor si rapid

Caracteristici tehnice
• Afisare continua valorile parametrilor operationale
• Setarea inclinatia rotorului
• Capacitate maxima: in functie de rotorul selectat » vezi rotoarele si tuburile disponibile pentru acest model »
• Setarea timpul in pasi de secunde
• Memoriaza 10 programe operationale
• Tasta comanda impulse: pentru de operatiuni scurte
• Sistem de racire: –20 °C la +40 °C
• Rotoare interschimbabile
• Recunoastere automata a rotorului
• Interferente cu undele radio EN 55011 B
• Dimensiuni: 346 x 401 x 695 cm
• Greutate: 52 kg
Protectie
Conform norme IEC 61010; CE mark si cele relevante, standarde EC, DIN si ISO 9001:2000
Dispozitiv de blocare care permite inchiderea si deschiderea capacului;
Carcasa si capac metalic rezistent la socuri
Incinta de centrifugare din otel inoxidabil

Ghid selectie Rotoare / Tuburi »

  Rotoare interschimbabile Interchangable Rotors Cat. No.
rotor_oscilant_fara_suspensii Rotor oscilant / 4-locuri / Unghi: 90°
RPM max.: 4,500 min-1
RCF max.: 3,328
fara suspensii
Swing-out rotor / 4-place / Angle: 90°
RPM max.: 4,500 min-1
RCF max.: 3,328
without carriers
1554
Rotor oscilant cu 4 locuri Rotor oscilant / 4-locuri / Unghi: 90°
RPM max.: 5,000 min-1
RCF max.: 4,193
fara suspensii
Swing-out rotor / 4-place / Angle: 90°
RPM max.: 5,000 min-1
RCF max.: 4,193
without carriers
. 1494
rotor_centrifuga_ 4_locuri Rotor oscilant / 4-locuri / Unghi: 90°
RPM max.: 4,000 min-1
RCF max.: 2,665
fara suspensii
Swing-out rotor / 4-place / Angle: 90°
RPM max.: 4,000 min-1
RCF max.: 2,665
without carriers
1624
rotor_oscilant_hettich.png Rotor oscilant / 4-locuri / Unghi: 90°
RPM max.: 4,500 min-1
RCF max.: 3,328
fara suspensii
Swing-out rotor / 4-place / Angle: 90°
RPM max.: 4,500 min-1
RCF max.: 3,328
without carriers
1324
rotor_oscilant_ 6_locuri Rotor oscilant / 6-locuri / Unghi: 90°
RPM max.: 4,000 min-1
RCF max.: 2,701
fara suspensii
Swing-out rotor / 6-place / Angle: 90°
RPM max.: 4,000 min-1
RCF max.: 2,701
without carriers
1619
rotor_oscilant_ 6_locuri Rotor oscilant / 8-locuri / Unghi: 45°
RPM max.: 5,000 min-1
RCF max.: 3,857
fara suspensii
Swing-out rotor / 8-place / Angle: 45°
RPM max.: 5,000 min-1
RCF max.: 3,857
without carriers
1617
rotor_oscilant_12_locuri Rotor oscilant / 12-locuri / Unghi: 55°/60°/80°
RPM max.: 5,000 min-1
RCF max.: 4,193
fara suspensii
Swing-out rotor / 12-place / Angle: 55°/60°/80°
RPM max.: 5,000 min-1
RCF max.: 4,193
without carriers
1628
rotor_centrifuga_tuburi Rotor oscilant / 8-locuri / Unghi: 90°
RPM max.: 4,000 min-1
RCF max.: 2,415
fara suspensii
Swing-out rotor / 8-place / Angle: 90°
RPM max.: 4,000 min-1
RCF max.: 2,415
without carriers
1611
rotor_oscilant_colectare_sange Rotor oscilant / 2-locuri / Unghi: 90°
RPM max.: 4,000 min-1
RCF max.: 2,218
fara suspensii
Swing-out rotor / 2-place / Angle: 90°
RPM max.: 4,000 min-1
RCF max.: 2,218
without carriers
1460
rotor_oscilant_vacutainer Rotor oscilant / 4-locuri / Unghi: 90°
RPM max.: 4,000 min-1
RCF max.: 1,896
fara suspensii
Swing-out rotor / 4-place / Angle: 90°
RPM max.: 4,000 min-1
RCF max.: 1,896
without carriers
1645
rotor_centrifuga_12_tuburi Rotor unghiular fix / 12-locuri / Unghi: 45°
RPM max.: 15,000 min-1
RCF max.: 16,602
fara suspensii
Angle rotor / 12-place / Angle: 45°
RPM max.: 15,000 min-1
RCF max.: 16,602
without carriers
1612
rotor_oscilant_24_locuri Rotor unghiular fix / 24-locuri / Unghi: 40°
RPM max.: 15,000 min-1
RCF max.: 21,382
fara suspensii
Angle rotor / 24-place / Angle: 40°
RPM max.: 15,000 min-1
RCF max.: 21,382
without carriers
1420-B
rotor_oscilant_30_locuri Rotor unghiular fix / 30-locuri / Unghi: 45°
RPM max.: 14,000 min-1
RCF max.: 21,255
with bio-containment, in conformity with DIN EN 61010, section 2 - 020
Angle rotor / 30-place / Angle: 45°
RPM max.: 14,000 min-1
RCF max.: 21,255
with bio-containment, in conformity with DIN EN 61010, section 2 - 020
1689-A
rotor_centrifuga_8_tuburi Rotor unghiular fix / 8-locuri / Unghi: 45°
RPM max.: 4,500 min-1
RCF max.: 3,305
fara suspensii
Angle rotor / 8-place / Angle: 45°
RPM max.: 4,500 min-1
RCF max.: 3,305
without carriers
1418
rotor_centrifuga_6_locuri Rotor unghiular fix / 6-locuri / Unghi: 35°
RPM max.: 9,000 min-1
RCF max.: 9,509
fara suspensii
Angle rotor / 6-place / Angle: 35°
RPM max.: 9,000 min-1
RCF max.: 9,509
without carriers
1620A
rotor_centrifuga_12_locuri Rotor unghiular fix / 12-locuri / Unghi: 35°
RPM max.: 6,000 min-1
RCF max.: 4,146
fara suspensii
Angle rotor / 12-place / Angle: 35°
RPM max.: 6,000 min-1
RCF max.: 4,146
without carriers
1613
rotor_centrifuga_eppendorf Rotor unghiular fix / 12-locuri / Unghi: 35°
RPM max.: 12,000 min-1
RCF max.: 16,582
Angle rotor / 12-place / Angle: 35°
RPM max.: 12,000 min-1
RCF max.: 16,582
1615
rotor_centrifuga_hematocrit_sange Rotor Hematocrit / 24-locuri / Unghi: 90°
RPM max.: 15,000 min-1
RCF max.: 21,382
Hematocrit rotor / 24-place / Angle: 90°
RPM max.: 15,000 min-1
RCF max.: 21,382
1650
rotor_centrifuga_citologica Rotor lame citologice / 6-locuri
RPM max.: 4,000 min-1
RCF max.: 2,039
Cyto rotor / 6-place
RPM max.: 4,000 min-1
RCF max.: 2,039
1626

 

With a comprehensive range of accessories, the U-320R centrifuge is the perfect universal centrifuges for routines in basic research and R&D laboratories of the pharmaceutical and biotechnical industry. The microprocessor controlled centrifuges have a brushless frequency drive (no carbon brushes) and a motorized lid locking.
Advantages
- High RCF
- Extremely short run-up and run-down times
- Metal housing, Metal Lid
- Stainless steel centrifuging chamber
- Viewing port in the lid
- Infinitely variable setting from –20 °C to +40 °C
- Fast Cool function
- Automatic lid locking
- Emergency lid-lock release
- Easily exchangeable rotors
- 10 programmable memories
- 9 acceleration and braking ramps, or unbreaked run-up or-run down time
- Automatic rotor recognition
Safety
Conform to safety regulations such as IEC 61010 or the CE mark and all relevant EC standards and DIN norms and have been manufactured under ISO 9001:2000
- Lid locking and holding during rotor run
- Emergency lid lock release
- Motor overheating protection
- Chamber overheating protection
- Imbalance switch-off
- Lid dropping protection
Controls and displays
During centrifugation the actual values of the parameters are indicated
Change-over RPM/RCF: by entering the rotor radius r/mm the Centrifuge will calculate/indicate speed or RCF.
Time preselection in steps of minutes and seconds / Continuous operation
Temperature T/°C: Input in increments of 1°C
Impulse key: For short centrifugation operations

Technical data
Max. RPM (speed) / RCF: 15000 RPM / 21.382 RCF
Noise level: 58 dB(A)
Radio interference: EN 55011 ISM class B
Immunity: EN 61000-6-2
Dimensions: 346 x 401 x 695 mm
Weight: approx 52 kg

micro_centrifuge_laborator
Centrifuga capacitate 400 ml. cu racire racire pana la -20°C :: Viteza max. 16500 RPM :: Rotoare interschimbabile si Tuburi universale

Refrigerated / Temperature Regulated Centrifuge :: Model Digicen 21R / producator OrtoAlresa - Spania


Pret : la cerere


Livrare: 10 - 14 zile lucratoare


Certificat de conformitate


Centru service autorizat de producator


produsul poate fi achizitionat si prin SEAP


solicit oferta personalizata »

Centrifuga de masa, de mare turatie, cu sistem fortat de refrigerare, pentru turatii de maxim 16.000 rpm, sau camp gravitational de peste 24.959 xg; versatilitate ridicata datorita posibilitatii de interschimbare a unui numar mare de rotoare basculante sau rotoare unghiulare fixe
- Rotoare basculanete, pentru tuburi de 4 x 100 ml si adaptoare pentru toate forme de eprubete cu sau fara cap insurubat, microtuburi, placi de microtitrare, criotuburi.
- Rotoare cu unghiu fix de viteze mai mici potrivite pentru probe sensibile sau pentru procedurilor de rutina
- Rotoare cu unghiu fix de viteze mari pentru microtuburi de 50 ml si cele conice.
Rotoarele si adaptoarele sunt autoclavabile.
Optional posibilitate documentare / validare IQ,OQ,PQ de catre ingineri MultiLab instruiti si certificati de producator

Avantaje
Panou de control tactil soft-touch usor de utilizat si Ecran LCD mare, pentru o buna vizualizare si un usor control al parametrilor; afiseaza in timp real parametri selectati sau cicluri programate; timpul, vitezei de rotatie RPM, RCF, temperatura, intervale de oprire (pauza), icoane grafice de capc deschis, bara de progres, semnale acustice

Sistem de racire
Ventilatie optimizata a aerului pentru prevenirea incalzirii probelor in cantitati reduse
Sistem preracire a rotorului in timpul stationarii pentru pastrare probelor la o temperatura stabila
Generator refrigerare extrem de silentioasa
Compartiment de racire cu design compact

Caracteristici tehnice
Fereastra de vizualizare in capac pentru verificari calibrare rapide
Inchidere automata a capacului
Reglare viteza in pasi de 100 rpm /10xg
Timer selectabil incrimente de 1°C
Accelerare / Decelerare in pasi de 1 secunda)
Programe multiple Intuitive configurabile pornire – oprire - procese scurte
Lista de rotoare in memorie si Identificare automata a rotorului
Cronometru a timpului pentru reproductibile cu functia "tasta rpm/rcf porneste cronometrarea aplicatiei atunci cand viteza setata a fost atinsa
Viteza reglabila "Short Spin" de ajustare a vitezei pentru centrifugare scurta
Comanda directa pentru accelerare si franare
15 programe predefinite si un program de pre-racire
Inchidere capac motorizata
Controlata de microprocessor
Posibilitate de relare viteza RPM/RCF in timpul operarii (optional)

Specificatii tehnice
Motor inductie fara perii, nu necesita intretinere
Capacitate maxima 4 tuburi x 100 ml.
Viteza pana la 24.959 xg/16.500 RPM.
Nivel de zgomot: ≤ 60 dB.
Temperatura de pre-refrigerare: selectabilator pana la - 4°C /viteza maxima.
Domeniu de refrigerare: -20°C to 40°C (refrigerent R 404A HFC)
Control temperatura: sonda de temperatura (interiorul cuva).

Siguranta
Sistem dublu de blocare a capacului
- Comutator electronic de reglare a stabilitatii
- Oprire automata in caz de dezechilibru rotor
- Mod oprire manual in caz de urgenta
- Camera de centrifugare din otel inox
- Fereastra de vizualizare in capac pentru verificari / calibrare rapide
- Mesaje afisate in timp real asupra procesul in desfasurare
- Semnale acustice la terminarea porgramului de centrifugare sau in cazul detectiei unei erori
- Coloase de protectie si inele de amortizare intre carcasa si camera de centrifugare
- Sistem electronic de reglare si control a frecventei compresorului si al ventilarii

Fabricata in conformitate cu normele internationale de siguranta / Certficate:
- Directive EU: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
- Norme: 1005/2009 & 842/2006.
- Standarde: EN 61010-1, EN 61010-2-020, EN 61326-1.

Adaptoare care poate fi accesorizata centrifuga Digicen 21R

Model / Rotor centrifuga_rotor_8_tuburi
RT 143
centrifuga_rotor_16_tuburi
RT 138 (1)
centrifuga_rotor_vacutainer
RT 150
centrifuga_rotor_lame
RT 183
centrifuga_rotor_48_tuburi
RT 128
Tip Rotor basculant basculant basculant unghiular fix disk orizontal
Capacitate maxima 4 x 50 ml. 4 x 100 ml. 2,4 de 6 Microtiter 32 de 0,2 ml. 24 de 1,5 x 75 ml.
RPM 5300 5000 4000 16500 13000
Raza (mm) 145 147 122 (4) 55 (4) 87
RCF Max. (xg) 4554 4019 2182 16741 16438
Tmp. min. / Viteza max. (°C) -4 -4 0 2 1

 

Model / Rotor centrifuga_rotor_24_tuburi
RT 151 (3)
centrifuga_rotor_24_eprubete
RT 110
centrifuga_rotor_16_eprubete
RT 106
centrifuga_rotor_12_eprubete
RT 108
centrifuga_rotor_10_eprubete
RT 121 (3)
Tip Rotor unghiular fix 45° unghiular fix 35° unghiular fix 35° unghiular fix 35° unghiular fix 45°
Capacitate maxima 24 de 1,5-2 ml. 24 x 5 ml. 18 x 15 ml. 24 x 15 ml. 6 x 50 ml.
RPM 16500 6500 5000 5000 6000
Raza (mm) 82 113 132 132/114 132
RCF Max. (xg) 24959 5338 3689 3689/3186 5313
Tmp. min. / Viteza max. (°C) 2 1 0 -1 1

 

Model / Rotor centrifuga_rotor_8_eprubete
RT 152 (3)
centrifuga_rotor_6_eprubete
RT 153 (3)
centrifuga_rotor_4_eprubete
RT 154 (3)
centrifuga_rotor_2_eprubete
RT 253
Tip Rotor unghiular fix 30° unghiular fix 30° unghiular fix 28° unghiular fix 45°
Capacitate maxima 12 x 10 ml Hermet 8 x 30 ml Hermet 6 x 50 ml Hermet 12 x 5 ml
RPM 15000 13500 9000 16500
Raza (mm) 78 92 101 87
RCF Max. (xg) 19621 18746 9146 26480
Tmp. min. / Viteza max. (°C) 4 4 1 5

Tuburi si microtuburi centrifugale Falcon; Eppendorf, PCR, HTML,.. .. mai multe »

The centrifuge refrigerated Digicen 21R can reach up to 24.959 xg with a wide range of rotors:
Swing out rotors, with a max volume of 4 x 100 ml which can fit several set of adapters for tubes with or without caps, microtubes, microplates.
Angle fixed low speed for routine purposes.
Angle fixed high speed from microtubes to 50 ml conical tubes.
On LCD screen shown the selectable values as time, RPM, RCF, temperature and braking time as well as graphics for lid open, progress bar, and acoustic signals for a better control about the process by operator.
The powerful refrigeration system, enhanced by the pre-cooling program, keep the samples at stable and controlled temperature, avoiding sample´s temperature fluctuations at introducing into the device.

Main Features
LCD screen shown RPM/RCF (on steps 100 RPM/10xg),time, temperature (1°C steps) and acceleration/deceleration (1 second steps)
Intuitive handling through start, stop, short spin and lid keys
Rotor list on memory
Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility
Short spin key with speed adjustable
Automatic rotor recognition
Acceleration and braking selectable by operator
15 memories and pre-cooling program
Lid latch lock
Microprocessor controlled
Option: free or locked adjustment of RPM/RCF along the run.

Technical Specifications
Induction motor maintenance free
Max. capacity 4 x 100 ml.
Speed, up to 24.959 xg / 16.500 RPM.
Quiet: noise level < 60 dB.
Cooling System
- Precooling program with rotor spinning and temperature selectable by operator.
- 4°C at Max speed as higher.
- Temperature range -20°C to 40°C
- Temperature sensor inside the chamber, gas R 404A HFC.
Safety
- Lid locking and holding
- Imbalance switch off
- Manual overriding
- Chamber of centrifugation in stainless steel
- Viewing and calibration port in the lid
- Several messages keep the operator informed about the device situation
- Guard ring between the chamber of centrifugation and the housing
- Lid dropping protection.
Certfification
- EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
- Regulation: 1005/2009 & 842/2006.
- Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.

centrifuga_refrigerare_Eppendorf
Centrifuga cu racire pentru volume pana la 4 x 750 ml racire pana la -20°C :: Viteza max. 14300 RPM :: Rotoare interschimbabile si Tuburi universale

High Performane Refrigerated Centrifuge :: Model Digtor 21R / producator OrtoAlresa - Spania


Pret : la cerere


Livrare: 10 - 14 zile lucratoare


Certificat de conformitate


Centru service autorizat de producator


produsul poate fi achizitionat si prin SEAP


solicit oferta personalizata »

Centrifuga universala de performanta, cu sistem dinamic de racire si reglare viteza in pasi de 100 rpm pana la 20.804 xg; Programarea vitezei de rotatie (in trepte de 10 rpm), a fortei centrifugale relative, a temperaturii (in trepte de cate 1°C) si a timpului de operare se face de la tastatura.
Versatilitate ridicata datorita posibilitatii de interschimbare a unui numar mare de rotoare basculante cu rotoare unghiulare de viteza ridicata:
Poate fi adaptatata cu rotoare pentru volume pana la 4 x 750 ml sau 52 tuburi conice de 15 ml; cuplate cu multe variante de suspensii si adaptoare pentru eprubete standard, tuburi cu cap insurubat sau fara cap, eprubete pentru recoltare sange si cito- accesorii, microtuburi si placi de microtitrare.
Display mare LCD afiseaza parametri selectate sau programate; timpul, vitezei de rotatie RPM, RCF, temperatura, intervale de oprire (pauza), icoane grafice de capc deschis, bara de progres, semnale acustice
Sistem preracire a rotorului in timpul stationarii pentru pastrare probelor la o temperatura stabila
Rotoarele si adaptoarele sunt autoclavabile.

Avantaje
Display TFT tactil / touch-screen afiseaza parametri selectate sau programate; timpul, vitezei de rotatie RPM, RCF, temperatura, intervale de oprire (pauza), icoane grafice de capc deschis, bara de progres, semnale acustice, parametri afisate poate fi citite de la o distanta de pana la 3m.
Identificare automata a rotorului
Recunoastere automata a rotorului cu afisarea vitezei maxime admisibile
Lista de rotoare si adaptoare sunt memorizate.
Afiseaza valorile reale a RCF in functie de accesori selectat
Rezultate reproductibile cu functia "set RPM/RCF" care porneste cronometrarea aplicatiei atunci cand viteza setata a fost atinsa.
Functie "Short-Spin" de ajustare a vitezei pentru centrifugare scurta.
Ajustare accelerare si franare progresive pana la 175 rampe
Datele si programe poate fi protejate cu parola
Programare simpla a timpului si a vitezei (rpm/ rcf)
Memorarea procedurilor de rutina
Inchidere capac automata
Sistem electronic integrat de control
Functie de mentinere sau schimbare valori RPM/RCF selectati in timpul centrifugari (optional)

Specificatii tehnice
Motor tip inductie fara perii, nu necesita intretinere;
Capacitate / Volum max.: 4 x 750 ml
Viteza max.: 20.804xg./14.300 RPM
Nivel de zgomot: < 60 dB
15 programe + program de preracire.
Program de preracire (temperatura selectabila) a rotorului in timpul stationarii; (pre-raceste camera rotorului la temperatura de maxim 4°C)
Sistem electronic de Mentinere temperatura de +4°C in timpul centrifugarii, la viteza maxima, pentru toate tipurile de rotor cu care functioneaza
Functie pentru racire care pastreaza camera rotorului la temperatura setata cat timp capacul este inchis
Domeniu de temperatura: -20°C .. 40°C
Scala temperatura: Celsius sau Fahrenheit.
Control temperatura: sonda temperatura in incinta
Tip regrigerent: ecologic R 404A HFC
Documentare / Validare IQ,OQ,PQ de catre ingineri instruiti si certificati de producator

Siguranta
Sistem dublu de blocare a capacului.
Imbalance switch off.
Comutator de reglare a stabilitatii; oprire automata in caz de dezechilibru rotor
Verificari calibrare rapide
Ventilatie optimizata a aerului pentru prevenirea incalzirii probelor in cantitati reduse
Fereastra de vizualizare in capac pentru verificari si calibrari
Afisare in timp real mesaje de functionare.
Culoasa si inele de protectie si amortizare intre cuva centrifuga si carcasa
Cuva de centrifugare din otel inox.
Fabricata in conformitate cu normele internationale de siguranta:
- Directive EU: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
- Norme: 1005/2009 & 842/2006.
- Standarde: EN 61010-1, EN 61010-2-020, EN 61326-1.

Accesorii optionale Centrifuga Digtor 21R

Model / Rotor centrifuga_rotor_suspensie
RT 191 (1)
centrifuga_rotor_unghiular
RT 192
centrifuga_rotor_basculant.png
RT 195
centrifuga_rotor_eprubete
RT 238
centrifuga_rotor_angel_fixed
RT 197
Tip Rotor basculant basculant basculant unghiular fix 30° unghiular fix 45°
Max. capacity 4x750 ml. 4x250 ml. 104x5ml. 6x85 ml. 8x50 ml.
RPM 3700 4200 3800 9000 6000
Raza (mm) 204 202 185 112 149
RCF Max. (xg) 3122 3984 2987 10142 5997
Tmp. min. / Viteza max. (°C) 0 1 0 1 0

 

Model / Rotor centrifuga_rotor_pungi_sange
RT 198

RT 199
centrifuga_rotor_suspensie
RT 201 (1)(2)
centrifuga_rotor_microtiter
RT 202
centrifuga_rotor_swing_out
RT 206
Tip Rotor unghiular fix 45° unghiular fix 30° basculant basculant unghiular fix 30°
Capacitate maxima 4x100 ml. 4x250 ml. 4 bolsas sangre 12 p. microtiter 30x1,5-2 ml.
RPM 5600 4700 3700 3700 14300
Raza (mm) 138 153 204 182 (3) 96
RCF Max. (xg) 4838 3779 3122 2786 21948
Tmp. min. / Viteza max. (°C) -1 -4 0 -4 -1

Tuburi si microtuburi centrifugale Falcon; Eppendorf, PCR, HTML,.. mai multe »

The Digtor 21R is formed for devices highly functional, so that allow be present on routine labs, research, biotechnology, quality control for several attributes as:
Innovation: its provided of TFT touch screen allowing higher automony to the operator as well as control the separation stages,and save energy system selectable.
Versatility: from 4 x 750 ml, 52 conical tubes of 15 ml, rotor for microplates, microtubes, and a wide range of adapter for each one.
Safety: It shows the real value of RCF based on accessories configuration, without introduce any parameter, as well as is provided of biocontainment accesories.
Efficiency: Max RCF 20.804 xg, acceleration and deceleration time selectables, depending of sample features, dynamic cooling system which reduces the time to reach the selected temperature.

Main Feature
TFT touch screen easy to read and values selection (RPM on steps of 100, RCF on steps of 10xg), time, temperature (1°C steps), acceleration/deceleration (1 second steps).
The screen which indicates the status can be seen from more than 3 m.
Rotor and adapters list on memory.
Real values on screen of RCF based on accessories configuration.
Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
Short spin key with speed adjustable.
Progressive acceleration and braking selectable by operator up to 175 ramps.
Program data protection through password selectable.
Automatic rotor recognition.
Automatic lid latch lock.
Microprocessor controlled.
Option: free or locked adjustment of RPM/RCF along the run.
Technical Specification
- Induction motor maintenance free
- High capacity: Max. Volume 4 x 750 ml
- High Speed, up to 20.804xg./14.300 RPM
- Quiet: noise level < 60 dB
- 15 memories + pre-cooling program.
- Cooling System
- Precooling program with rotor spinning and temperature selectable by operator
- 4°C at least at max speed with any rotor
- Range of temperature -20°C to 40°C
- Scale Celsius or Fahrenheit.
- Temperature sensor inside the chamber.
- Gas R 404A HFC.
Safety
- Lid locking and holding.
- Imbalance switch off.
- Lid dropping protection.
- Manual overriding.
- Chamber of centrifugation in stainless steel.
- Viewing and calibration prot in the lid.
- Several messages keep the operator informed about the device situation.
- Guard ring between the chamber of centrifugation and the housing.
Standards
- EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
- Regulation: 1005/2009 & 842/2006.
- Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.