Analizor de inflamabilitate Pensky Martens

Aparate pentru determinarea limita inferioara si superioara de inflamabilitate uleiuri combustibili si produse petroliere lichide

aparat_vas_inchis_inflamabilitate video_analizor_pensky-martens

Inflametru Pensky Martens automat
Model ML-AD0093-700

Aparate pentru determinarea limita inferioara si superioara de inflamabilitate combustibili si produse petroliere lichide conform ASTM D 93 (A+B+C) - IP 34 - ISO 2719 (A+B) - DIN 51758

Pensky-Martens Closed Cup Automatic Flash-point tester with integrated barometric correction system


Pret : la cerere


Certificat de conformitate


Made in EU


solicit oferta personalizata »

Caracteristici tehnice
Analizor automat punctelor de inflamabilitate si de ardere ale fractiunilor de petrol
Aparatul este configurat pentru metoda standard Pensky-Martens cu vas inchis ASTM D 93 (A+B+C) - IP 34 - ISO 2719 (A+B) - DIN 51758
Operare usoara datorita ecranului tactil si sistemului de meniuri intuitive cu afsaj color mare cu clasa de protectie IP 65
Controlul aparatului de catre operator se face prin intermediul ecranului tactil soft-touch, Softwarul (pe platforma Windows) permite initierea simpla a testelor standard si alte 40 de teste personalizate, programarea parametrilor pentru test, diagnosticarea sistemului si vizualizarea rezultatelor stocate in memoria interna, introducerea parametrilor de test prin intermediul touch-screen, posibilitatea schimbarii punctului setat in timpul testului si optiune de cautare "Search" pentru probe necunoscute
In memoria aparatului se pot memora pana la 40 de metode ASTM/IP de catre operator
Permite teste non standard de cautare a punctului de inflamare la probe care nu se cunoaste punctul de inflamare
Sursa automata de aprindere dubla; automat / interschimbabile atat cu gaz cat si electric (ambele incluse)
Incalzire controlata prin microprocesor cu rata de incalzire 1 la 1.5°C/min
Barometru automat incorporat pentru corectie autoamata a rezultatelor la presiune atmosferica standard, folosind presiunea atmosferica masurata la momentul testarii
Posibilitate de conectare la o sursa de apa sau la un criostat pentru o racire fortata
Baza de date integrata pentru stocarea a 800 de rezultate
Dispozitiv de protectie care opreste analizatorul daca nu se detecteaza punctul de inflamabilitate la o temperatura de peste 30°C peste valoarea stabilita
Echipat cu sistem de detectie termica a flamei, care elimina inerferenta probelor cu apa sau probelor cu nontinut de silice
Sistem de detectie pentru incendiu si alarmare
Sonde si senzori: senzor de ionizare, sonda Pt100 RTD, sonda de temperatura Pt100 cu cablu de conexiune
Agitator electric viteza reglabila 105 rpm pentru ASTM D 93 method A and C si 250 rpm pentru metoda B; si setabila pentru alte metode
Baie de aer din fonta cu racire fortata, prevazuta cu manta din otel inoxidabil
Ventilator electric pentru racirea fortata a vasului dupa efectuarea testului
Prevazut cu sistem de conexiune la retea LAN pentru conectare la PC, imprimanta sau alte computere in retea
Conexiuni directe: 2 intrari USB si o interfata seriala RS-232
Carcasa: aliaj inox/aluminiu, vopsea epoxi
Vas calibrat din bronz pentru ulei, prevazuta cu maner izolat termic
Capac pentru vas din bronz prevazut cu locas pentru sonda de temperatura Pt100RTD
Putere: 800 W
Dimensiune (l x w x h): 280 x 480 x 650 mm
Greutate: 20 kg
Alimentare: 220 V/50 Hz

Conformitate & Certificate
• certificat de conformitate
• certificat de garantie si post garantie MultiLab Romania
• Centru de service autorizat MultiLab Romania

Accesorii optionale
Imprimanta / Printer :: Cod Prod. AD0093-A00
Simulator pentru sonda de temperatura / PT100 simulator :: Cod Prod. CAL001
Simulator certificat pt. sonda de temperatura / Certified PT100 simulator :: Cod Prod. CAL002
Consumabile
Oil cup :: Cod Prod. AD0093-C00
Lid :: Cod Prod. AD0093-C01
PT100 probe :: Cod Prod. AD0093-C02
Electric ignitor :: Cod Prod. AD0093-C03
Gas ignitor :: Cod Prod. AD0093-C04

Main features
The apparatus is a benchtop model which houses the mechanical components and a miniature PC with touch screen. A software running under Windows Xp permits to select the test method and the test parameters, run the test automatically, store, retrieve and print data, diagnose and calibrate the instrument offering in the meanwhile all the features of Windows systems such as LAN connectivity.
The instrument is equipped with a sensor for barometric pressure for the correction of the results towards atmospheric pressure.

Technical Data
Enamel finished benchtop steel and aluminium case
Cast iron air stove identical to the one reported on the ASTM method
Brass oil cup and lid with insulating handle
Jacket for glass-coated Pt100 RTD in the cover (n°1 Pt100 with cable and quick connector supplied with the instrument)
Brass oil cup and lid with insulating handle
Jacket for glass-coated Pt100 RTD in the cover (n°1 Pt100 with cable and quick connector supplied with the instrument). Electric stirrer that stops during flame dipping
Stirrer speed: 105 rpm for ASTM D 93 method A and C and 250 rpm for method B. Other speeds can be selected for custom methods
Automatic flame dipping: provision for gas or electric ignitor
Electric heating.Measuring range: from ambient to 400°C
Electric cooling fan to cool down the stove at the end of the test
Ignition system: a slide supporting both ignitor and pilot flame permits a quicker and safe removal of the cover at the end of the test, avoiding to disconnect electric ignitor cables and/or gas ignitor tubes that remain always connected
It is possible to use both gas or electric ignitor: when a gas ignitor is used, the electric one can be used as pilot flame
PC based controller with 6" color touch-screen interface. IP 65 front protection
Software characteristics: selection of the ASTM/IP test method or setup of up to 40 custom methods, introduction of the testparameters through the touch screen, possibility to change the setpoint during the test, selectable rapid preheating (in case of sample with high flash point is possible to pre-heat the sample at a higher rate to speed-up the test), “search” option (forsample with unknown flash point), selectable cooling time, storage of-up to 800 test results and possibility to retrieve and print test reports, calibration and diagnostic routines
LAN connectivity: the apparatus can be connected directly to a hub to become part of the user network: a software supplied with the apparatus permits to retrieve data also from another PC
Two USB and one RS-232 serial interfaces
Flash point detection through ionization sensor: the apparatus also provides an alert if a flash has occurred at the first flame application, warning that the test result is not reliable.
The flash point temperature remains shown on the display until the operator’s acknowledgement: buzzer to alert the user. Safety device is provided to stop the analyzer if a flash has not been detected at a temperature 30°C over the preset value. This safety device could be excluded to perform "search" tests.
Microsoft Windows Xp original license
Dimensions (l x w x h): 280 x 480 x 650 mm
Weight: kg 20 approx. Source power: 220 V/50 Hz
Power consumption: 800 W
CE marked.

inflametru_motorina_vas_inchis

Inflametru digital Pensky Martens semiautomat
Model ML-AD0093-120

Tester de inflamabilitate semiautomat digital Pensky Martens conform ASTM D 93 - IP 34 - ISO 2719

Semi-automatic Pensky-Martens digital flash point tester


Pret : la cerere


Certificat de conformitate


Made in EU


solicit oferta personalizata »

Caracteristici tehnice
Aparat digital semi-automat pentru determinarea punctului de inflamabilitate a unei game mari de produse, procedeul "capacului inchis" in conformitate cu standardele in vigoare: ASTM D 93 - IP 34 - ISO 2719

Date Tehnice
• Agitator cu viteza de 100 rpm si 250 rpm
• Domeniul de temperatura ambient..370°C
• Sonda Pt100
• Display digital
• Acuratete: 0.1°C
• Cuptor electric cu controler electronic al temperaturii
• Scanteie dubla
• Ventilatie fortata
• Cupa de alama cu maner
• Sistem de prindere al cupei Baie de aer din fonta
• Inel de prindere termometru
• Structura din otel inoxidabil
• Cuptor din otel inoxidabil
• Marcaj CE
• Putere: 900 W
• Sursa curent: 220V/50-60 Hz
• Dimensiuni: 240 x 330 x 450 mm
• Greutate: 10 kg.

Conformitate & Certificate
• certificat de conformitate
• certificat de garantie si post garantie MultiLab Romania
• Centru de service autorizat MultiLab Romania

Accesorii optionale
PT100 simulator :: Cod Prod. CAL001
Certified PT100 simulator :: Cod Prod. CAL002
ASTM 9C thermometer (-5/+110°C) :: Cod Prod. TA009C-N00
ASTM 10C thermometer (+90/+370°C) :: Cod Prod. TA010C-N00
Consumabile
Oil cup :: Cod Prod. AD0093-C00
Lid :: Cod Prod. AD0093-C01
PT100 probe :: Cod Prod. IP0170-C02
Gas ignitor :: Cod Prod. IP0170-C04

Main features
a benchtop model which houses the air bath stove and the stirrer motor: differently from other apparatus on the market, our instrument is equipped with a fan that cools down the stove quickly after the test.

Technical Data
Enamel finished benchtop steel case
Cast iron stove, electrically heated with stainless steel external shield
Voltage regulator with dial on the front panel
Pt100 probe for sample temperature acquisition
Digital display for sample temperature, 0.1°C accuracy
Oil cup, brass, complete with filling mark. Insulating handle
Lid with flame dipping mechanism
Electric stirrer, 100 or 250 rpm
Electric fan for a quick cooling of the stove at the end of the test
English written user manual
Power source: 220V/50 Hz
Power consumption: 900 W
Dimensions (l x w x h): 240 x 330 x 450 mm
Weight: 10 kg
CE approved.

flashpoint_pensky-martens

Inflametru Pensky Martens analogic economic semiautomat
Model ML-PM7173

Tester de inflamabilitate semiautomat analogic Pensky Martens conform ASTM D 93; ASTM E134 IP 34 ISO 2719 EN 22719

Semi-automatic Pensky-Martens flash point analogic tester


Pret : la cerere


Certificat de conformitate


Made in EU


solicit oferta personalizata »

Caracteristici tehnice
Aparat semi-automat pentru determinarea punctului de inflamabilitate a unei game mari de produse, procedeul „capacului inchis” in conformitate cu standardele in vigoare: ASTM, IP, ISO si DIN.

Date Tehnice
• Agitator cu viteza de 100 rpm si transmisie flexibila
• Domeniul de temperatura ambient..370°C
• Cuptor electric cu controler electronic al temperaturii
• Scanteie dubla
• Buton de operare
• Cupa de alama cu maner
• Sistem de prindere al cupei Baie de aer din fonta
• Inel de prindere termometru
• Structura si acoperire din otel inoxidabil
• Marcaj CE
• Sursa curent: 220V/50-60 Hz
• Dimensiuni: 300 x 300 x 600 mm
• Greutate: 11 kg.

Conformitate & Certificate
• certificat de conformitate
• certificat de garantie si post garantie MultiLab Romania
• Centru de service autorizat MultiLab Romania

Accesorii optionale
• Termometru ASTM 9C domeniu -5..110°C diviziuni 0.5°C
• Termometru ASTM 10C domeniu 90..370°C diviziuni 2°C

Main features
Instrument for determining the flash point of petroleum products in the temperature range from 40 to 360 ° C and the biodiesel in the temperature range from 60 to 190°C. Conforms to ASTM D93 E502 IP 34 EN 22719 ISO 15267 ISO 2719 DIN 51758 Flash point by Pensky Martens Closed Cup.
The flash point, or Flash Point, is the lowest temperature at which it produces a sufficient amount of steam to form a mixture with the air on the surface of the substance and can catch fire in the presence of an external ignition source. The situation above is reproduced under controlled conditions in the laboratory: in these test conditions the sample is placed in a special apparatus equipped with a closed vessel (closed cup) or open (open vessel).
The flash point determination in closed vessel is carried out via the Pensky-Martens device in which the sample to be examined is located within a cup closed by a perforated cover and a shutter
The material is heated with precise and constant increments: the higher the temperature the material will emit the gases mixing with the air in the cup
The shutter is opened at predetermined intervals and a small primer is directed towards the hole: the operation is repeated until you get a short flash.
The temperature at which Flash Point (this happens flashing), corrected for barometric pressure measured at the time of the analysis, is the flash point of the material

Testing Procedure
The Procedure A is applicable to distillate fuels (diesel, biodiesel blends, kerosene, heating oil, turbine fuels), new and used lubricants, and other petroleum liquids not included in the scope of the procedure B or C
The procedure B is applicable to residual oils, reduced residues, used lubricating oils, mixtures of liquids with solid oils, liquid oils which tend to form a surface film under test conditions, or are petroleum liquids of such kinematic viscosity that are not uniformly heated during the agitation conditions and heating conditions in the procedure A.
The procedure C applies to biodiesel (B100).
Since a flash point of residual alcohol in biodiesel is difficult to observe with manual techniques, an automatic apparatus with electronic flash point detection is considered more suitable.
Electric heating controlled by an electronic regulator, painted frame with anti-acid epoxy products.
In calibrated brass cup, lid with ignittore gas, ignition of the sample through the manual immersion of the injection device.
Agitation of the sample to be chosen as from procedure "A" and "B", air bath and cooling fan

Technical Data
- Operating temperature: 40 to 360°C
- Power supply: 220V 50Hz
- Power: 500 W
- Dimensions: 40 x 33 x 52 cm
- Weight: 11 kg
Delivered with: gas pipe, tank, reducer, thermometer ASTM 9C IP 15C, thermometer ASTM 10C IP 16C

multilab_team

Solutions for science, industry and safety
Suntem bucurosi sa te ajutam ... Fie ca vrei sa comanzi si nu esti sigur care este cea mai buna alegere, sau vrei sa afli mai multe despre serviciile noastre, consultantii nostri Iti raspund la orice intrebare
Pentru orice detalii suplimentare tehnice sau comerciale sintem la dispozitia Dvs.
direct Tel. +4 021 312 7144 / 45
sau

service_reparatie

Superior Service MultiLab's aim is to differentiate ourselves and add value to our customers, by providing superior service throughout the sales and after-care processes :: Preventative Maintenance - Calibration - Repair - Validation .. more »
Centru service autorizat de producator Service - Mentenantei preventive - Reparati - Consumabile - Piese de schimb, pentru analizoare si testare produse petroliere .. mai multe »

multilab_laboratories

*Important acest site este unul de prezentare! date tehnice; poze afisate si preturile sunt cu titlu informativ se pot schimba fara notificare prealabila! detalii »

All rights Reserved MultiLab© SRL Romania 2003 - 2016