aparat_spumare_D892 video_tester_spumare-uleiuri

Teste de spumare a uleiurilor
Model AD0892-100

Aparat pentru determinarea caracteristici de spumare a uleiurilor cu 2 posturi conform ASTM D 892 si IP 146

Single-unit apparatus for the determination of the foaming characteristics of lubricating oils


Pret : la cerere


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

Prezentare
Fenomenul de spumarea uleiurilor este determinată de prezenţa aerului sau a altor gaze dizolvate, prezenţă care atrage după sine o serie de inconveniente ca oxidarea uleiului sau formarea dopurilor de gaz

Unitate testare de spumare este formata dintro baie termostatata prevazuta cu 2 posturi (2 locasuri) de analiza conform ASTM D 892, pentru determinarea caracteristicilor de spumare ale uleiurilor lubrifiante la 24°C sau 93°C;
Aparatul poate fi folosit si pentru metoda ASTM D 892, secventa I, II, III, IV, utilizand componentele necesare, respectiv pietre poroase calibrate.
Date tehnice
Aparatul include un vas din Pyrex cu capac din aluminiu prevazut cu 2 orifici pentru 2 cilindri de probe cu sistem propriu de mentinere si reglare a temperaturii la valorile setate
Temperatura de testare poate fi setata la 24°C si la 93.5°C secventa I
Prevazut cu 2 debitmetre (cu certificat de calibrare pentru fiecare) de inalta precizie controlat electronic
Agitator cu dispozitiv de incalzire din otel inox pozitionat pe capacul vasului
Serpentine de racire conectate la o sursa de apa rece pentru mentinere temperatura constanta la 24°C Timpul de determinare este foarte scurt, conform metodei standard ASTM D892
Termoregulator PID cu afisaj digital de acuratete 0.1°C accuracy
Sonda de temperatura tip Pt100 RTD
Sistem de protectie pentru temperatura depasita sau nivel scazut de fluid
Panoul de Control montat pe blocul de termostatare, precum si afisarea valorilor de temeperatura respective pe un display digital; permite urmarirea parametrilor standardizati ASTM D892
Putere: 2200 W
Alimetare: 220 V/50 Hz
Dimensiune: 450 x 420 x 680 mm
Greutate: 30 Kg

Conformitate & Certificate
• marcat CE
• certificat de conformitate
• certificat de garantie si post garantie MultiLab Romania
• Centru de service autorizat MultiLab Romania

Accesorii
Wet test meter :: Cod prod. AD0892-A00
Officially certified wet test meter :: Cod prod. AD0892-A01
Air pump :: Cod prod. AD0892-A02
Glass drying tower :: Cod prod. AD0892-A03
PT100 simulator :: Cod prod. CAL001
Official Certificate for Pt100 simulator :: Cod prod. CAL003
Consumabile
Graduate pyrex glass cylinder :: Cod prod. AD0892-C00
Rubber stopper with air inlet and outlet :: Cod prod. AD0892-C01
Norton spherical Alundum gas diffuser stone (certified for permeability and pore size) :: Cod prod. AD0892-C02
Mott stainless steel cylindrical gas diffuser (certified for permeability and pore size) :: Cod prod. AD0892-C03
ASTM 12C thermometer (-20°C/+102°C) :: Cod prod. TA012C-N00

Main features
The apparatus consists of a steel frame supporting a Pyrex jar with a cover that allows to insert and fix two cylinders without necessity of any steel ring to avoid floatation, two high precision flowmeters and a control box containing all the electronics.

Technical Data
- Steel frame supporting one Pyrex jar, suitable for tests at 24 and at 93.5°C.
- Aluminium cover with two holes for the cylinders: locking clamps to hold the cylinders in position and thermometer jacket.
- Electrical bath stirrer on the jar cover.
- Stainless steel heaters.
- Stainless steel cooling coils: when connected to a cold water source, it permits to keep the bath temperature(24°C) prescribed in ASTM D 892 sequence 1.
- High precision variable area flowmeters complete with needle valve, supports and diffuser connections.
Individual calibration certificates.
- Microprocessor thermoregulator with PID action and built-in digital display 0.1°C accuracy Probe: Pt100 RTD.
- Safety devices against overheating and low level.
- Easy access control box.
- Power source 220 V/50 Hz
- Power consumption 2200 W
- Dimensions (l x w x h):450 x 420 x 680 mm
- Weight: kg 30
- CE marked
- Version with mass flow controller and software also available.

echipament_spumare_lubrifiante

Tester de spumare a uleiurilor lubrifiante
Model AD0892-200

Echipament pentru determinarea simulatana a spumare pe mai multe secvente conform ASTM D 892 - IP 146 - D 6082 si ISO 6247

Twin-unit apparatus for the determination of the foaming characteristics of lubricating oils


Pret : la cerere


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

Specificatii tehnice
Sistemul este compus din 2 unitati de testare primul la 24°C si aldoilea la 93.5°C; fiecare unitate include un vas din Pyrex cu capac din aluminiu prevazut cu 2 orifici pentru 2 cilindri de probe cu sistem propriu de mentinere si reglare a temperaturii la valorile setate
Temperatura de testare poate fi setata la 24°C secventa I si la 93.5°C secventa II
Fiecare unitate este prevazuta cu 2 debitmetre (cu certificat de calibrare pentru fiecare) de inalta precizie controlat electronic
Agitator cu dispozitiv de incalzire din otel inox pozitionat pe capacul vasului
Serpentine de racire conectate la o sursa de apa rece pentru mentinere temperatura constanta la 24°C Timpul de determinare este foarte scurt, conform metodei standard ASTM D892
Termoregulator PID cu afisaj digital de acuratete 0.1°C accuracy
Sonda de temperatura tip Pt100 RTD
Sistem de protectie pentru temperatura depasita sau nivel scazut de fluid
Panoul de Control montat pe blocul de termostatare, precum si afisarea valorilor de temeperatura respective pe un display digital; permite urmarirea parametrilor standardizati ASTM D892
Putere: 2200 W
Alimetare: 220 V/50 Hz
Dimensiune: 1050 x 420 x 680 mm
Greutate: 60 Kg

Conformitate & Certificate
• marcat CE
• certificat de conformitate
• certificat de garantie si post garantie MultiLab Romania
• Centru de service autorizat MultiLab Romania

Accesorii
Wet test meter :: cod prod. AD0892-A00
Officially certified wet test meter :: cod prod. AD0892-A01
Air pump :: cod prod. AD0892-A02
Glass drying tower :: cod prod. AD0892-A03
PT100 simulator :: cod prod. CAL001
Consumabile
Graduate pyrex glass cylinder :: cod prod. AD0892-C00
Rubber stopper with air inlet and outlet :: cod prod. AD0892-C01
Norton spherical Alundum gas diffuser stone (certified for permeability and pore size) :: cod prod. AD0892-C02
Mott stainless steel cylindrical gas diffuser (certified for permeability and pore size) :: cod prod. AD0892-C03
ASTM 12C thermometer (-20°C/+102°C) :: cod prod. TA012C-N00

Main features
The apparatus consists of a steel frame supporting two Pyrex jars with a cover that allows to insert and fix two cylinders without necessity of any steel ring to avoid floatation, four high precision flowmeters and a control box containing all the electronics.

Technical Data
- Steel frame supporting two Pyrex jars, one for tests at 24 and one for tests at 93.5°C.
- Aluminium covers with two holes for the cylinders: locking clamps to hold the cylinders in position and thermometer jacket.
- Electrical bath stirrer on the jar cover.
- Stainless steel heaters.
- Stainless steel cooling coils: when connected to a cold water source, it permits to keep the bath temperature (24°C) prescribed in ASTM D 892 sequence 1.
- High precision variable area flowmeters complete with needle valves, supports and diffuser connections.
- Individual calibration certificates.
- Microprocessor thermoregulator with PID action and built-in digital display 0.1°C accuracy (one for each bath)
- Probe: Pt100 RTD
- Safety devices against overheating and low level on both jars
- Easy access control box.
- Power source: 220V / 50Hz connections
- Power consumption: 2200 W
- Dimensions (l x w x h): 1050 x 420 x 680 mm
- Weight: kg 60
- CE marked. - Version with mass flow controller and software also available.

multilab_team

Solutions for science, industry and safety
Suntem bucurosi sa te ajutam ... Fie ca vrei sa comanzi si nu esti sigur care este cea mai buna alegere, sau vrei sa afli mai multe despre serviciile noastre, consultantii nostri Iti raspund la orice intrebare
Pentru orice detalii suplimentare tehnice sau comerciale sintem la dispozitia Dvs.
direct Tel. +4 021 312 7144 / 45
sau

service_reparatie

Superior Service MultiLab's aim is to differentiate ourselves and add value to our customers, by providing superior service throughout the sales and after-care processes :: Preventative Maintenance - Calibration - Repair - Validation .. more »
Centru service autorizat de producator Service - Mentenantei preventive - Reparati - Consumabile - Piese de schimb, pentru analizoare si testare produse petroliere .. mai multe »

multilab_laboratories

*Important acest site este unul de prezentare! date tehnice; poze afisate si preturile sunt cu titlu informativ se pot schimba fara notificare prealabila! detalii »

All rights Reserved MultiLab© SRL Romania 2003 - 2016