Masini universale incercari fizico-mecanice

verificare_caroserie_auto.png
Fiabilitate si performanta exclude orice comparatie

Testometric este lider de piata in domeniul masinilor de testarea materialelor cu cele mai flexibile sisteme pentru aplicatii fizico dinamice complexe.

Testometric este singurul producator care acopera standarde de conformitate EN10002-2, EN7500-1, DIN51221, ASTME4, AFNOR A03-501, JISB7721, respectiv incadrarea in limitele impuse de Grad 0.5 de la 0.4% la 100% concepute pentru realizarea teste statice dinamice tuturor standardelor de calitate si de conformitate internationale ASTM, DIN, AFNOR, ISO, ASTM - E-4 si ASTM-E-83. ASTM E4, UNI-EN-ISO 7500/1; EN, JIS, DIN si BS.

Avantaje
Sistem de masurare incercare si testare digitalizat integrat cu forte de actionare electromecanice pentru realizarea de teste fizico-mecanice in sensul digital de mare precizie; incercarile statice si dinamice care corespunde cerintelor tuturor standardelor de calitate si conformitate internationale (ASTM, DIN, AFNOR, ISO BS, BS EN, ASTM, NF si JIS) pentru efectuarea incercarilor asupra deferite materiale (plastice, ceramica, polimeri, metale ..etc) teste de torsiune, tractiune, compresiune, oboseala, indoiere, aplatizare, largire, rupere si incovoiere.

Structura de incarcare de mare stabilitate datorita designul perfectionat; dispozitive de prindere senzoriale pentru prindere perfecta si ferma a probei cu extensometru computerizat de inalta precizie, Sistemul electronic de operare este 100% digitalizat, controlat si integrat pentru sincronizare perfect controlata de software sofisticat de ultima generatie astfel incat intregul sistem sa poata rula in circuit integral fara erori.
Masinele testometric sint integrate cu program software de functionare, monitorizare si control inclusiv procese de testare avansate complexe si ciclice programabile.
Programul integrat de Software cuprinde biblioteca de programele de testare pentru toate normativele internationale; datele si rapoartele de testare pot fi usor generate sub sistemul de operare Windows pe computerul dvs. personal (modelele CT) sau direct pe ecranul aparatul de incercare (modelele AT) rezultatele poate fi transferate direct in alte aplicaţii de software tip rapoarte consolidate, analize SPC, manager de laborator, rapoarte de validare, documente GLP, etc.

Masini de incercare cu asezare pe masa


Masina incercare 500N

Masina electro mecanica digitala universala / model de masa cu o coloana / celula de forta 0.5 KN

Compression and tension Tester :: Model MultiTest 0.5-D

• Capacitate: 500 N / 0.5 KN / 51 KgF
• Viteza de revenire: 1 pana la 500mm/min reglabila in pasi de 0.01mm
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1200mm
• Diametru maxim de specimen: Ø 141 mm
• Greutate: 38 Kg

The MultiTest 0.5-d is a basic, rugged motorised test frame, enabling simple and efficient testing of elementary tension and compression applications up to 0.5 kN.
The stand has a column height of 1710 mm (67.3"), ideal for the elongation testing of highly elastic material such as rubber and film which require test stands with extended crosshead travel.
Used in combination with one of Mecmesin's digital force gauges (sold separately), the MultiTest 0.5-d is a highly affordable solution, which provides consistently reliable performance time and time again.

Masina de testare la tractiune

Masina electromecanica digitala universala / model de masa cu o coloana / celula de forta 1 KN

Tensile Tester :: Model M100-1 CT

Masini de testare pentru aplicatiile standarde EN10002-2, EN7500-1, DIN51221, ASTME4, AFNOR A03-501, JISB7721. Grade 0.5 de la 0.4% la 100%.
• Capacitate: 1kN / 102 KgF
• Viteza de revenire: 0.001 pana la 1000mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 620mm gat 200mm

Certificate
» Certificate ISO furnizor si service autorizat (MultiLab Romania)
» Certifcat de garantie si post garantie

The M100-1 CT is a small footprint, single column, computer controlled universal materials testing machine using Testometric's feature-rich winTest Analysis software running under the Windows operating system.
Test setups are fully configurable and simple or more complex multi-stage test routines are controlled using the standard PC serial interface.

Masina de testare la torsiune

Masina electro-mecanica digitala universala / model de masa cu o coloana / celula de forta 2.5 KN

Materials Testing Machine :: Model M250-2.5 AT/CT

• Capacitate: 2.5kN / 255 KgF
• Viteza de revenire: 0.001 pana la 1000mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1000mm gat 200mm

Machine Capacity 2.5kN
Speed Range: 0.001 to 1000 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 1000 mm
Throat: 200mm

Masina de incercari la intindere

Masina electromecanica digitala universala / model de masa cu o coloana / celula de forta 3 KN

Materials Testing Machine :: Model M250-3 AT/CT

• Capacitate: 3kN / 306 KgF
• Viteza de revenire: 0.001 pana la 1000mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1000mm gat 200mm

The M250-3 is a small footprint, single column, computer controlled universal materials testing machine using Testometric's feature-rich winTest Analysis software running under the Windows operating system.
Test setups are fully configurable and simple or more complex multi-stage test routines are controlled using the standard PC serial interface.
Standard Specification
Machine Capacity: 3kN
Speed Range: 0.001 to 1000mm/min in steps of 0.001mm/min
Crosshead Travel (excluding grips): 1000mm
Throat: 200mm

Masina de testare la incovoiere

Masina electromecanica digitala universala / model de masa cu o coloana / celula de forta 5 KN

Materials Testing Machine :: Model M350-5 AT/CT

• Capacitate: 5kN / 453 KgF
• Viteza de revenire: 0.001 pana la 2000mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1100mm gat 295mm

Machine Capacity: 5 kN
Speed Range: 0.001 to 2000 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 1100 mm
Throat: 295 mm

Masina de testare a duritaţii

Masina electromecanica digitala universala / model de masa cu o coloana / celula de forta 10 KN

Tensile Tester :: Model M350-10 AT/CT

• Capacitate: 10kN / 1019 KgF
• Viteza de revenire: 0.001 pana la1000mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1100mm gat mm 295mm

Machine Capacity: 10kN
Speed Range: 0.001 to 1000mm/min in steps of 0.001mm/min
Crosshead Travel (excluding grips): 1100 mm
Throat mm 295mm

masina_universala_teste_mecanice

Masina electro mecanica digitala universala / model de masa cu o coloana / celula de forta 20 KN

20 KN Materials Testing Machine :: Model M350-20 AT/CT

• Capacitate: 20kN / 2039 KgF
• Viteza de revenire: 0.001 pana la 500mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1100mm gat 295mm

The M350-20 range of twin column, computer controlled universal materials testing machine using Testometric's feature-rich winTest Analysis software running under the Windows operating system.
Test setups are fully configurable and simple or more complex multi-stage test routines are controlled using the standard PC serial interface.
Standard Specification
Machine Capacity: 20kN
Speed Range: 0.001 to 500mm/min in steps of 0.001mm/min
Crosshead Travel: (excluding grips) 100 mm
Throat: 295mm

Masina de incercari la indoire

Masina electromecanica digitala universala / model de masa cu o coloana / celula de forta 25 KN

25 KN Materials Testing Machine :: Model M500-25 AT/CT

• Capacitate: 25kN / 2500 KgF
• Viteza de revenire: 0.001 pana la 1000mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1050mm gat 420mm

Machine Capacity: 25kN
Speed Range: 0.001 to 1000 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 1050mm
Throat: 420 mm

Masina de incercari la rezilienta

Masina electromecanica digitala universala / model de masa cu o coloana / celula de forta 30 KN

Tensile Tester Machine :: Model M500-30 AT/CT

• Capacitate: 30kN / 3059 KgF
• Viteza de revenire: 0.001 pana la 1000mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1050mm gat 420mm

Machine Capacity: 30kN
Speed Range: 0.001 to 1000mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 1050mm
Throat: 420 mm

Masini de incercarea de etanseitate

Masina electromecanica digitala universala / model de masa cu o coloana / celula de forta 50 KN

50KN Universal Testing Machine :: Model M500-50 AT/CT

• Capacitate: 50kN / 4540 KgF
• Viteza de revenire: 0.001 pana la 1000mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 980mm gat 420mm

Machine Capacity: 50kN
Speed Range: 0.001 to 1000 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 980 mm
Throat: 420mm
Throat: 420 mm

Masini de masurat puterii mecanice

Masina electromecanica digitala universala cu o coloana / celula de forta 100 KN

Tensile Testing Machine :: Model M500-100 AT/CT

• Capacitate: 100kN / / 10197 KgF
• Viteza de revenire: 0.001 pana la 500mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1059mm gat 420mm

Machine Capacity: 100kN
Speed Range: 0.001 to 500 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 1059 mm
Throat: 420mm

Masini de incercare cu asezare pe pardoseala


Masina incercare intindere

Masina electromecanica digitala universala / model de podea cu o coloana / celula de forta 100 KN

Floor Standing Universal Testing Machine :: Model FS100 AT/CT

• Capacitate: 100kN / 10197 KgF
• Viteza de revenire: 0.001 pana la 600mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 900mm gat 480mm

Machine Capacity: 100kN
Speed Range: 0.001 to 600 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 900 mm
Throat: 480mm

Masina universal incercare

Masina electromecanica digitala universala / model de podea cu o coloana / celula de forta 150 KN

Floor Standing Universal Testing Machine :: Model FS150 AT/CT

• Capacitate: 150kN / 15295 KgF
• Viteza de revenire: 0.001 pana la 600mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 900mm gat 480mm

Machine Capacity: 150kN
Speed Range: 0.001 to 600 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 900 mm
Throat: 480mm

Masina incercare rupere

Masina electromecanica digitala universala / model de podea cu o coloana / celula de forta 300 KN

Floor Standing Universal Testing Machine :: Model FS300 AT/CT

• Capacitate: 300kN / 30590 KgF
• Viteza de revenire: 0.001 pana la 600mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 600mm gat 486mm

Machine Capacity: 300kN
Speed Range: 0.001 to 600 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 600 mm
Throat: 486mm

Masina incercare intindere

Masina electromecanica digitala universala / model de podea cu o coloana / celula de forta 500 KN

Floor Standing Universal Testing Machine :: Model FS500 AT/CT

• Capacitate: 500kN / 50985 KgF
• Viteza de revenire: 0.001 pana la 600mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1300mm gat 600mm

Machine Capacity: 500kN
Speed Range: 0.001 to 600 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 1300 mm
Throat: 600 mm

aparat incercare forta 600 kN

Masina electromecanica digitala universala / model de podea cu 2 coloane / celule de forta 600 KN

Floor Standing Universal Testing Machine :: Model FS600 AT/CT

• Capacitate: 600kN / 61180 KgF
• Viteza de revenire: 0.001 pana la 600mm/min reglabila in pasi de 0.001mm/min
• Parcurs capului de prindere: (fara cleme si pini de fixare) 1300mm gat 1200mm

Machine Capacity: 600kN
Speed Range: 0.001 to 600 mm/min in steps of 0.001 mm/min
Crosshead Travel (excluding grips): 1300 mm
Throat: 1200 mm

Produse corelate
multilab_team

.. Suntem bucurosi sa te ajutam.... Fie ca vrei sa comanzi si nu esti sigur care este cea mai buna alegere, sau vrei sa afli mai multe despre serviciile noastre, consultantii nostri Iti raspund la orice intrebare
Pentru orice detalii suplimentare tehnice sau comerciale sintem la dispozitia Dvs. direct Tel. +4 021 312 7144 / 45
sau testere@multilab.ro

multilab_laboratories

*Important: acest site este unul de prezentare! date tehnice; poze afisate si preturile sunt cu titlu informativ se pot schimba fara notificare prealabila!
All rights Reserved MultiLab© SRL Romania 2003 - 2016