Aparat dorn cilindric
Model Elcometer 1506

Tester cu dorn cilindric pentru testarea rezistentei la indoire alungirii elasticitatii peliculelor

Cylindrical Mandrel Tester


produsul poate fi achizitionat si prin SEAP


solicit oferta personalizata »

Dispozitiv pentru testarea elasticitatii, aderentei si elongatiei vopselei uscate de pe suprafete metalice; permite indoirea placutelor de testare cu grosimi diferite (functie de materialul placutei) utilizand 14 dornuri cilindrice cu diametre diferite.
Prevazut cu un maner, ajustabil pe inaltime si o menghina glisanta pentru proba; instrumentul poate fi adaptat la diametrul dornului utilizat.
Probele cu o latime de pana la 70 mm si 80 mm sau cu o lungime de 100 mm (pentru un dorn cu diametrul de 2 mm, respectiv 32 mm) sunt perfect indoite pe dornuri descrescatoare pana cand se observa crapaturile.

Date tehnice
Conform standarde: AS/NZS 1580.402.1, ASTM D 522-B, ASTM D 1737, ISO 1519-2, JIS K 5600-5-1
Set de 14 dornuri: 2, 3, 4, 5, 6, 8, 10, 12, 13, 16, 19, 20, 25 si 32 mm
grosime maxima a placutei testate/diam minim dorn:

Material Grosime maxima Diam. minim dorn
Otel 0.5 mm 2 mm
1 mm 4 mm
Aluminiu 1 mm 3 mm
1.5 mm 4 mm
mat. cu rezistenta de indoire mai mica decat rez. aluminiu 4 mm 4 mm

 

A robust bend tester used to determine the elasticity, adhesion and elongation properties of cured coatings on sheet metal. in conformity with the followin standards:
AS/NZS 1580.402.1, ASTM D 522-B, ASTM D 1737, ISO 1519-2, JIS K 5600-5-1

The frame has a bending lever with height-adjustable rollers and a sliding vice for clamping the sample which means the test pieces are bent perfectly and regularly on decreasing mandrels until the desired effect can be observed.
The instrument can be adjusted to the diameter of the mandrel used and the mandrels are easily changed.
A wide range of mandrels with metric and imperial diameters is available. Mandrels are not supplied with the instrument and can be ordered as a set or individually.

Technical specifications
Test Piece Width Maximum: 64 mm
Test Piece Length Maximum: 80 to 100 mm depending on the size of the Mandrel used
Dimensions: 320 x 135 x 130 mm
Weight: 4.3kg
Packing List: Elcometer 1506 Cylindrical Mandrel Bend Tester and operating instructions

Optional accessories
Set 14 dornuri


Aparat dorn conic
Model Elcometer 1510

Tester cu dorn conic pentru testarea rezistentei la indoire alungirii elasticitatii peliculelor

Conical Mandrel Tester


produsul poate fi achizitionat si prin SEAP


solicit oferta personalizata »

Dispozitiv pentru determinarea elasticitatii, aderentei si elongatiei vopselei aplicate pe placa de metal, permite indoirea placutelor de testare cu grosimi diferite (functie de materialul placutei) utilizand pentru indoire un singur dorn de forma conica
Cadrul are un maner de indoire prevazut cu un cilindru ce pivoteaza pe un dorn conic din otel cu un diametru de 3.2 pana la 38.1 mm
Constructie robusta si rigida asigura o mare rezistenta la deformare si o durata mare de viata. Proba poate fi indoita pe o parte sau de-a lungul intregii lungimi a dornului, iar rezultatele (crapaturile) corespunzatoare diferitelor diametre de testare pot fi observate intr-o singura operatie.

Date tehnice
Conform standarde: ASTM D 522-A, BS 3900-E11, ISO 6860
Diametre: 3.2 - 38.1 mm
Dimensiune de probe: 180 x 100 x 0.8 mm
Dimensiune: 325 x 350 x 100 mm
Greutate: 9kg

Grosime maxima a placutei testate:

Material Grosime maxima
Otel 1 mm
Aluminiu 2 mm
mat. cu rezistenta de indoire mai mica decat rez. aluminiu 4 mm

Livrare: Tester Elcometer 1510 Conical Mandrel Bend Tester si manual de utilizare

The Elcometer 1510 Conical Mandrel Bend Tester is used to determine the effects of bending on the elasticity, adhesion and elongation properties of cured coatings on sheet metal.
The frame has a bending lever with a roller which pivots on a steel conical mandrel with a diameter from 3.2 - 38.1 mm (0.12 - 1.5”). A graduation indicates the mandrel diameter in both mm and inches.
The specimen can be bent on part of, or along, the entire length of the mandrel, and the results (cracks) corresponding to different test diameters can be observed in a single operation. This is ideal for use in conjunction with the cylindrical mandrel, as it identifies the stop point for more focused testing.
As the instrument is machined out of a solid block of steel, the particularly robust and rigid construction provides excellent resistance to wear and provides long service life. A large, sturdy anodised base, which can be permanently fixed to a workstation, ensures stability during testing.

Technical specifications
Diameter Range: 3.2 - 38.1 mm
Sample Size: 180 x 100 x 0.8 mm
Dimensions: 325 x 350 x100 mm
Weight: 9kg
Packing List: Elcometer 1510 Conical Mandrel Bend Tester and operating instructions


echipa_multilab

Solutions for science, industry and safety systems

Suntem bucurosi sa te ajutam ... Fie ca vrei sa comanzi si nu esti sigur care este cea mai buna alegere, sau vrei sa afli mai multe despre serviciile noastre, consultantii nostri Iti raspund la orice intrebare
Pentru orice detalii suplimentare tehnice sau comerciale sintem la dispozitia Dvs.
direct Tel. +4 021 312 7144 / 45
sau

service_reparatie_aparatura_laborator

Superior Service
MultiLab's aim is to differentiate ourselves and add value to our customers, by providing superior service throughout the sales and after-care processes :: Preventative Maintenance - Calibration - Repair - Validation .. more »
Centru service autorizat de producator
Service - Mentenantei preventive - Reparati - Consumabile - Piese de schimb, pentru aparatura si instrumente de analioza detectie si control .. mai multe »

Localizare MultiLab

multilab_laboratories

*Important
acest site este unul de prezentare! date tehnice; poze afisate si preturile sunt cu titlu informativ se pot schimba fara notificare prealabila! detalii »
MultiLab© SRL reserve the right to change products and prices without notice.

All rights Reserved MultiLab© SRL Romania 2003 - 2017