Utilaje productie industria farmaceutica cosmetica alimentara

Aparate_industria_farmaceutica

Importator & Distribuitor autorizat in Romania pentru vanzare - service produsele

home Home :: contact Contact :: service Service :: laboratoare Produse
 


ro Echipamente si utilaje pentru industria farmaceutica si cosmetica » Masini Micro-productie si Industriale

uk Pharmaceutical Processing & Testing Equipment » Batch & processing Machines


jp_selecta_romania IKA_romania burkle_romania


amestecator sub vid

Amestecator circulator inlinie

The ULTRA-TURRAX® UTC is a high-performance dispersing machine used for the production of a variety of emulsions and suspensions in batch operations. Using the rotor-stator principle, the UTC is best suited for applications that cannot be accomplished using conventional stirring methods. The UTC machine stator is mounted to the shaft tube and is capable of processing of media with a viscosity of up to 5.000 mPas.
The preferred installation positions for the UTC are: diagonal from above, diagonal from the side or vertical off-centre.

mai multe .. pentru productie pilot »

mai multe .. pentru procese in serie »


uscator granule

Amestecator cu recirculare

The ULTRA-TURRAX® UTS is a high-performance dispersing machine for the production of emulsions and suspensions in batch operations. Using the rotor-stator principle, the UTS is best suited for applications that cannot be accomplished using conventional stirring methods. The UTS machine is capable of processing highly abrasive products and media with a viscosity of up to 5.000 mPas. The UTS stator is connected to the motor with a mounting flange and extension rods. Because the rotating shaft seal is located directly on the motor flange, seal contact with the actual product is prevented. The UTS machine design meets specifications for dispersion production in the pharmaceutical industry or for processing of abrasive products in other industries.

mai multe .. pentru productie pilot »

mai multe .. pentru procese in serie »

granulator cu uscare

Amestecator omogenizator dispersor

The ULTRA-TURRAX® UTE is a high-performance dispersing machine designed for bottom entry into vessels. It mixes, emulsifies, and disperses free-flowing or liquid media with a viscosity of up to 5.000 mPas in batch operation. Using the rotor-stator principle, the UTE is best suited for applications that cannot be accomplished using conventional stirring methods. Strong vortices as well as aeration are avoided with the UTE machine, even when very low fill levels occur in the tank or vessels are emptied during stirring or dispersing. The UTE machine has a simple, robust design. The three phase motor, the shaft for the rotor drive, and the flange for mounting of the stator are combined by means of a lantern into one compact unit. The standard version of the ULTRA-TURRAX® UTE is suitable for process temperatures of up to 120°C. The shaft seal occurs via a low-maintenance mechanical seal.

mai multe .. pentru productie pilot »

mai multe .. pentru procese in serie »



amestecator sub vid

Dispersor de performanta

The IKA ULTRA-TURRAX UTL 2000 is inline high-performance single-stage dispersing machine used for the production of emulsions and suspensions.

mai multe .. pentru productie pilot »

mai multe .. pentru procese in serie »

uscator granule

Amestecator - dispersor

The lower-priced ULTRA-TURRAX UTL 1000 machines are particularly multifunctional and are used for the mixing, dispersing (emulsifying/suspending) and homogenizing of solid and liquid substances up to viscosities of several thousand mPa·s, such as honey, plastic masses and crèmes. The mixing components are fed into the machine at the inlet connection. The materials are mixed, homogenized and then discharged from the machine via the outlet connection. The machine does not have automatic suction, but does have a conveyor height of up to 20 meters.

mai multe .. pentru productie pilot »

mai multe .. pentru procese in serie »

granulator cu uscare

Dispersor de mare forfecare

The IKA DISPAX-REACTOR® DR 2000 is a three-stage high shear inline dispersing machine used for the production of very fine emulsions and suspensions. Shear forces that occur in the working chamber produce a drastic increase of mass transfer and accelerate the dissolving rates of mono and macromolecular substances. Three rotor-stator combinations (generators) in a series ensure small- droplet or particle size and a very narrow distribution spectrum. This process promotes a long stability of mixtures in a single pass, especially when working with emulsions.

mai multe .. pentru productie pilot »

mai multe .. pentru procese in serie »



amestecator sub vid

Dispersor micro-emulsie

The DISPAX-REACTOR® DRS is an inline ultra high shear dispersing machine used to achieve the finest micro-emulsions and suspensions. Extremely high shear rates (up to 190.000 1/s) combined with a fine generator geometry enable crushing of droplets and solids particles down to the nanoscale.

mai multe .. pentru productie pilot »

mai multe .. pentru procese in serie »

amestecator sub vid

Moara coloidala

The IKA MK 2000 is a high-performance inline colloid mill capable of performing wet and fine milling of tough and grainy raw materials. The MK 2000 is especially suitable for the production of colloidal solutions or extremely fine emulsions and suspensions. Excellent dispersing performance allows the IKA Colloid Mill MK 2000 to be used for continuous processes, providing a narrow distribution range of ground particles in a single pass. For challenging milling tasks the colloid mill can be installed into a recirculation loop with a working vessel by means of tube connections.

mai multe .. pentru productie pilot »

mai multe .. pentru procese in serie »

amestecator sub vid

Amestecator de procesare cu uscare sub vid

The IKA MKO 2000 is a high-performance inline cone mill capable of performing wet and fine milling of tough and grainy or crystalline raw materials. The MKO 2000 is especially suitable for the de-agglomeration of suspensions. Excellent dispersing performance allows the IKA Cone Mill MKO 2000 to be used for continuous processes, providing a narrow distribution range of ground particles in a single pass. For challenging milling tasks the cone mill can be installed into a recirculation loop with a working vessel by means of tube connections.

mai multe .. pentru productie pilot »

mai multe .. pentru procese in serie »



utilaje_cosmetice

*Important: acest site este unul de prezentare! Date tehnice; Poze afisate si Preturile sunt cu titlu informativ se pot schimba fara nutificare prealabila .. cititi rubrica Legal »

Produse corelate
omogenizator_ultrasunete

Dispersoare portabile de laborator »

cotatie_pret

Solicit oferta de pret »
Request / Price quotation »



informati

Consultatnta Tehnica »
Technical consultancy »



service_aparatura_laborator

Service - Mentenanta - Reparati - Consumabile - Piese de schimb, pentru echipamente si instrumente de testare masura si control »



 
Urmareste-ne ⇝ multilab_twitter multilab_linkedin multilab_facebook

| Despre noi | Identitate | Referinte | Contact | Harta-Site | Legal | Conditii generale | Intrebari frecvente | Asistenta pe Email | Service on-line | Assistenta on-line|