Bai de calibrare senzori de temperatura sonde si termometre


Bai uscate de calibrare multifunctionale
Modele seria ML-T

Bai de calibrare portabile si de laborator posibilitate de calibrare a mai multor senzori simultan

Portable Temperature calibrators

Utilizare: destinata verificarii si calibrarii in laborator si pe teren a sondelor si senzorilor de temperatura

Specificatii tehnice

Model ML-T140 ML-T375 ML-T650
Certificate Certificat de conformitate Certificat de conf. si DNV A-13537 (pt. navei) Certificat de conf. si DNV A-13537 (pt. navei)
Domeniu de temperatura (la 20°C) -24 .. 140 °C 30 .. 375 °C 35 .. 650 °C
*Acuratete / 1 an (pt. senzor intern) ±0.25°C la 100 °C ±0.35°C ±0.5°C
**Acuratete / 2 ani (pt. senzor intern) ±0.6C la 100 °C ±0.8°C ±0.9°C
Stabilitate ±0.05 °C ±0.10 °C ±0.3 °C
Tip de bloc bloc uscat / interschimbabil bloc uscat / interschimbabil bloc uscat / interschimbabil
Diametru / bloc Ø19 mm Ø26 mm Ø26 mm
Adincime / bloc 104 mm 150 mm 150 mm
**Insertie (standard) 1x4.8mm,
2 x6.4 mm,
1 x 3.3 mm
1 x 11.1mm,
1 x 3.2mm,
1 x4.8mm,
1x6.4mm
1x10.5mm,
1x3.2mm,
1x7.0mm,
1 x3.2 mm
Display / Afisaj -45 .. 140 °C 0 .. 375 °C 0 .. 650 °C
Display LED bi-liniar LED bi-liniar LED bi-liniar
Rezolutie 0.1°C 0.1°C 0.1°C
Durata / Timpul de incalzire (cat si durata de stabilitate) -20°C la 120°C in 20 min 30°C la 375°C in 20 min 50°C la 650°C in 30 min
Durata / Timpul de racire (cat si durata de stabilitate) 20°C la –20°C in 17 min 375°C la 100°C in 30 min 650°C la 100°C in 30 min
Rampa programabila integrata integrata integrata
Functie comutator de încercare Automat inchis/deschis Automat inchis/deschis Automat inchis/deschis
Intefata digitala RS232 (optional converter USB) RS232 (optional converter USB) RS232 (optional converter USB)
Cert. de Calibrare traceabila Inclus Inclus Inclus
Alimentare 100/230 VAC, 50/60 Hz 100/230 VAC, 50/60 Hz 115/230 50/60 Hz
Putere 80W 600W 600W
Dimensiune 130 x 260x 280 mm 130x260x280 mm 130x260,x 280 mm
Livrare standard Calibrator de temperatur, dispozitiv de insertie standard, dispozitiv pentru scoatere, comutator cablurile de testare, manual de operare, certificat de calibrare

*Specificatii tehnice sint stabilite la 20°C, folosind senzorul intern de temperatura, sarcina Ø3mm ( T140, T375) sarcina Ø4.5mm( T650) senzor de referinta in centrul orificiului
**Insertii cu gauri diferite disponibile la cerere

Conformitate & Certificate
• Certificat de conformitate
• Certificat de garantie si post garantie MultiLab Romania
• Centru de service autorizat MultiLab Romania

Main Features
Available in 3 models to cover a temperature range from –24 to 650°C. The new block technology allow for fast heating/cooling whilst maintaining high accuracy and stability.
The rugged construction and the light weight make it the ideal tool for on-site or on-board calibration.
Temperature range –24 to 650°C
3 separate models
High stability and accuracy
Interchangeable multi-hole inserts
Automatic switch test function
Automatic Ramp
100-240 switching main power
DNV type approval for use on-board of vessel
Extended calibration interval

Advantages
Interchangeable Inserts Multi-holes Interchangeable inserts are used to match the diameter of the sensors under test to fit your application
Automatic switch test Set your automatic ramp( slope) with up to 0.1°C per minute rate. The TM series will store for you the contact open and closed. No need for any additional mustimeter. Maximise your time and perform other tasks while the TM will do the job for you.
Up to two years calibration interval Best accuracy with the recommended one year calibration interval. Save money and logistic issues by extending the calibration interval to 2 years. Particularly suitable when the TM Calibrator are on board-vessel
Fully programmable ramp Programme your ramp, and monitor the temperature sensors from the control panel while the TM is sourcing the temperature in the engine room.
Adjust and calibrate every where The TM series is vert easy and straight forward to adjust and recalibrate. There is no need of PC or special software. All you need is a reliable reference sensor. Simply place the probe in the calibrator and follow the instruction

Model ML-T140 ML-T375 ML-T650
Type Approval Conformity Cert. DNV certificate A-13537 DNV certificate A-13537
Temperature Range (@ 20°C) -24 to 140 °C 30 to 375 °C 35 to 650 °C
*1 year Accuracy ( internal sensor) ±0.25°C @ 100 °C ±0.35°C ±0.5°C
*2 year Accuracy ( internal sensor) ±0.6C @ 100 °C ±0.8°C ±0.9°C
Stability ±0.05 °C ±0.10 °C ±0.3 °C
Block type dry block dry block dry block
Block Diameter Ø19 mm Ø26 mm Ø26 mm
Block Depth 104 mm 150 mm 150 mm
Standard insert supplied 1x4.8mm,
2 x6.4 mm,
1 x 3.3 mm
1 x 11.1mm,
1 x 3.2mm,
1 x4.8mm,
1x6.4mm
1x10.5mm,
1x3.2mm,
1x7.0mm,
1 x3.2 mm
Display range -45 to 140 °C 0 to 375 °C 0 to 650 °C
Display Type LED dual line LED dual line LED dual line
Resolution 0.1°C 0.1°C 0.1°C
Heating time (including stabilization time) 20°C to 120°C in 20 min 30°C to 375°C in 20 min 50°C to 650°C in 30 min
Cooling Time ( including stabilization Time) 20°C to –20°C in 17 min 375°C to 100°C in 30 min 650°C to 100°C in 30 min
On-board Full programmable Ramp integrated integrated integrated
Switch test function automatic close/open automatic close/open automatic close/open
Digital interface RS232 (optional USB converter) RS232 (optional USB converter) RS232 (optional USB converter)
Traceable Calibration Certificate Included Included Included
Power Supply (automatic switching) 100/230 VAC, 50/60 Hz 100/230 VAC, 50/60 Hz 115/230 50/60 Hz
Power 80W 600W 600W
Dimension 130 x 260x 280 mm 130x260x280 mm 130x260,x 280 mm
Standard delivery Temperature calibrator, standard insert, tool for insert removal, switch test leads, instruction manual, calibration certificate

*Specification are quoted at 20C, using internal sensor, load Ø3mm ( T140, T375) Load Ø4.5mm( T650) reference sensor in the middle of the hole

 

Accesorii optional Optional Accesories
Temperature Calibrator - Vinyl Case with pockets and shoulder strap
- Custom inserts, 1 hole
- Custom inserts, 2 holes 3.5 mm and 10 mm
- Custom inserts, 2 holes 5.5 and 13 mm
- Insert Blank
- RS232 to USB converter PTB/PLB/TM
Calibrare sonde temperatura Senzori si Sonde de temperatura / Umiditate
Gama completa de senzori si sonde de temperatura pentru laboratoare, procese industriale si sisteme de monitorizare .. detalii »

 

multilab_team

Solutions for science, industry and safety
Suntem bucurosi sa te ajutam ... Fie ca vrei sa comanzi si nu esti sigur care este cea mai buna alegere, sau vrei sa afli mai multe despre serviciile noastre, consultantii nostri Iti raspund la orice intrebare
Pentru orice detalii suplimentare tehnice sau comerciale sintem la dispozitia Dvs.
direct Tel. +4 021 312 7144 / 45
sau

service_reparatie

Superior Service MultiLab's aim is to differentiate ourselves and add value to our customers, by providing superior service throughout the sales and after-care processes :: Preventative Maintenance - Calibration - Repair - Validation .. more »
Centru service autorizat de producator Service - Mentenantei preventive - Reparati - Consumabile - Piese de schimb, .. mai multe »

multilab_laboratories

*Important acest site este unul de prezentare! date tehnice; poze afisate si preturile sunt cu titlu informativ se pot schimba fara notificare prealabila! detalii »

All rights Reserved MultiLab© SRL Romania 2003 - 2017