Agitatoare Eurostar cu ax vertical

video_agitator_mecanic
blender_ingridiente_lichide

Mixer electronic vertical multifunctional cu tije interschimbabile
lichide cu viscozitatea mica pana la 10.000 mPa*s :: Viteza / turatie 2200 RPM
Capacitate de amestecare: 15lit.

Agitator universal de performanta tip mixer vertical

Electronic Overhead Stirrer :: Model EUROSTAR 20 Digital


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

Performanta:
• Capacitate de agitare: 15 lit
• Vitezei de agitare reglabila: 0/30 - 2000 rpm
Aplicatie: lichide cu viscozitatea pana la 10000 mPa*s.

Avantaje
• Agitatoare electro-mecanice profesionale proiectate pentru agitarea probelor de pana intre 15 si 200 de litri (H2O)
• Control automat pentru o viteza constanta chiar daca proba isi schimba vascozitatea
• Ajustare si sincronizare electronic automat viteza
• Viteza ajustabila la infinit
• Comparatia in continuu a vitezei cu valoarea dorita va mentine si va ajusta automat viteza.
• Display LED sau TFT pentru afisarea vitezei
• Afisaj coduri de eroare
• Operare pe termen scurt cu supraincarcare
• Operare silentioasa
• Protectie prin circuitele de siguranta instalate asigura o inchidere automata la conditii de inclinare sau de supraincarcare

Specificatii tehnice

Model EUROSTAR 20 Digital
Cantitatea maxima de lichid (H2O) 15 lit.
Vascozitate maxima 10,000 mPas
Putere motor intrare/iesire 70 / 42 W
Timpul operare ON permis 100 %
Domeniul de viteza 0/30 – 2000 rpm
Torsiune max. la axul de agitare 20 Ncm
Afisaj LED
Directie reversibila de rotatie nu
Operare intermitenta nu
Interfata sonda temperatura nu
Mandrina de strangere / prindere 0.5 – 10 mm
Transmisie cu arbore tubular da
Masurarea cuplului nu
Timer nu
Temperatura nu
Domeniu masurare a temperaturii
Dimensiune W x D x H 86 x 208 x 248 mm
Greutate 4.4 kg
Temperatura de operare 5 – 40 °C
Umiditatea relative permisa 80%
Clasa de protectie DIN EN 60529 IP 40
Interfata USB / RS 232 nu
Alimentare 230 V; 50/60 Hz
Cod.Produs 4442000
 

Main features
Laboratory stirrer designed for simple stirring tasks for quantities up to 15 l (H2O)
It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm.
Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions.
Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically.
This guarantees a constant speed even with changes in viscosities of the sample.
Digital speed display
Infinitely adjustable speed
Push-through agitator shafts
Overload protection
Short-term overload operation
Slim casing
Quiet operation
Error code display

Technical data

Stirring quantity max. per stirring position (H2O) 15 l
Motor rating input 70 W
Motor rating output 42 W
Motor principle Brushless DC
Speed display LED
Speed range 0/30 - 2000 rpm
Reversible direction of rotation no
Intermittent operation no
Viscosity max. 10000 mPas
Output max. at stirring shaft 42 W
Permissible ON time 100 %
Torque max. at stirring shaft 20 Ncm
Speed control stepless
Setting accuracy speed 1 ±rpm
Deviation of speed measurement n > 300rpm 1 ±%
Deviation of speed measurement n < 300rpm 3 ±rpm
Stirring element fastening chuck
Temperature display no
Chuck range min. diameter 0.5 mm
Chuck range max. diameter 10 mm
Hollow shaft, inner diameter 11 mm
Hollow shaft (push-through - when stopped) yes
Fastening on stand extension arm
Extension arm diameter 16 mm
Extension arm length 220 mm
Torque display no
Nominal torque 0.2 Nm
Timer no
housing material alu-cast coating / thermoplastic polymer
clean room qualified no
explosion proofed no
Dimensions (W x H x D) 86 x 248 x 208 mm
Weight 4.4 kg
Permissible ambient temperature 5 - 40°C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 40
USB interface no
RS 232 interface no
Analog output no
Voltage 230 / 115 / 100 V
Frequency 50/60 Hz
Power input 70 W

 

ika_eurostar_40.png

Agitator pentru amestecare probelor de pana la 25 de litri (H2O) si vascozitate maxima de 30.000 mPa.
:: Viteza / turatie 2000 RPM

Agitator digital cu circuite de siguranta integrate

Universal overhead laboratory stirrer :: Model EUROSTAR 40 digital


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

 

Model EUROSTAR 40 Digital
Cantitatea maxima de lichid (H2O) 25 lit.
Vascozitate maxima 30,000 mPas
Putere motor intrare/iesire 118 / 84 W
Timpul operare ON permis 100 %
Domeniul de viteza 0/30 – 2000 rpm
Torsiune max. la axul de agitare 40 Ncm
Afisaj LED
Directie reversibila de rotatie nu
Operare intermitenta nu
Interfata sonda temperatura nu
Mandrina de strangere / prindere 0.5 – 10 mm
Transmisie cu arbore tubular da
Masurarea cuplului nu
Timer nu
Temperatura nu
Domeniu masurare a temperaturii
Dimensiune W x D x H 86 x 208 x 248 mm
Greutate 4.4 kg
Temperatura de operare 5 – 40 °C
Umiditatea relative permisa 80%
Clasa de protectie DIN EN 60529 IP 40
Interfata USB / RS 232 nu
Alimentare 230 V; 50/60 Hz
Cod.Produs 4444000

 

Main features
Universal laboratory stirrer designed for simple stirring tasks for quantities up to 25 l (H2O).
It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm.
Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions.
Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically.
This guarantees a constant speed even with changes in viscosities of the sample.
Digital speed display
Infinitely adjustable speed
Push-through agitator shafts
Overload protection
Short-term overload operation
Slim casing
Quiet operation
Error code display

Technical Data

Stirring quantity max. per stirring position (H2O) 25 l
Motor rating input 118 W
Motor rating output 84 W
Motor principle Brushless DC
Speed display 7 segment LED
Speed range 0/30 - 2000 rpm
Reversible direction of rotation no
Intermittent operation no
Viscosity max. 30000 mPas
Output max. at stirring shaft 84 W
Permissible ON time 100%
Torque max. at stirring shaft 40 Ncm
Speed control stepless
Setting accuracy speed 1 ±rpm
Deviation of speed measurement n > 300rpm 1 ±%
Deviation of speed measurement n < 300rpm 3 ±rpm
Stirring element fastening chuck
Temperature display no
Chuck range min. diameter 0.5 mm
Chuck range max. diameter 10 mm
Hollow shaft, inner diameter 11 mm
Hollow shaft (push-through - when stopped) yes
Fastening on stand extension arm
Extension arm diameter 16 mm
Extension arm length 220 mm
Torque display no
Nominal torque 0.4 Nm
Timer no
housing material alu-cast coating / thermoplastic polymer
clean room qualified no
explosion proofed no
Dimensions (W x H x D) 86 x 248 x 208 mm
Weight 4.4 kg
Permissible ambient temperature 5 - 40°C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 40
USB interface no
RS 232 interface no
Analog output no
Voltage 230 / 115 / 100 V
Frequency 50/60 Hz
Power input 118 W

 


Agitator, mixer electronic cu ax vertical pentru agitarea probelor de pana la 40 de litri (H2O) si vascozitate maxima de 50.000 mPa.
:: Viteza / turatie 2000 RPM

Agitator electronic puternic si optinal operare wireless

Powerfull overhead stirrer :: Model EUROSTAR 60 digital si Model EUROSTAR 60-Control cu controler wireless detasabil si un display TFT


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

 

Model EUROSTAR 60 Digital EUROSTAR 60 Control
Cantitatea maxima de lichid (H2O) 40 lit. 40 lit.
Vascozitate maxima 50,000 mPas 50,000 mPas
Putere motor intrare/iesire 176 / 126 W 176 / 126 W
Timpul operare ON permis 100 % 100 %
Domeniul de viteza 0/30 – 2000 rpm 0/30 – 2000 rpm
Torsiune max. la axul de agitare 60 Ncm 60 Ncm
Afisaj LED TFT
Directie reversibila de rotatie nu nu
Operare intermitenta nu da
Interfata sonda temperatura nu PT 1000
Mandrina de strangere / prindere 0.5 – 10 mm 0.5 – 10 mm
Transmisie cu arbore tubular da da
Masurarea cuplului nu da
Timer nu da
Temperatura nu da
Domeniu masurare a temperaturii - -10 .. 350 °C
Dimensiune W x D x H 86 x 208 x 248 mm 86 x 230 x 267 mm
Greutate 4.4 kg 4.7 kg
Temperatura de operare 5 – 40 °C 5 – 40 °C
Umiditatea relative permisa 80% 80%
Clasa de protectie DIN EN 60529 IP 40 IP 40
Interfata USB / RS 232 nu da
Alimentare 230 V50/60 Hz 230 V50/60 Hz
Cod.Produs 446000 4440000

 

Main features
Universal laboratory stirrer designed with a removable wireless controller and a digital TFT display.
It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm.
The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters.
An integrated torque trend display is provided for the measurement of viscosity changes.
Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions.
Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically.
This guarantees a constant speed even with changes in viscosities of the sample.

Technical Data

Model EUROSTAR 60 digital EUROSTAR 60 digital Control
Stirring quantity max. per stirring position (H2O) 40 l 40 l
Motor rating input 176 W 168 W
Motor rating output 126 W 131 W
Motor principle Brushless DC Brushless DC
Speed display 7 segment LED TFT
Speed range 0/30 - 2000 rpm 0/30 - 2000 rpm
Reversible direction of rotation no no
Intermittent operation no yes
Viscosity max. 50000 mPas 50000 mPas
Output max. at stirring shaft 126 W 126 W
Permissible ON time 100 % 100 %
Torque max. at stirring shaft 60 Ncm 60 Ncm
Speed control stepless stepless
Setting accuracy speed 1 ±rpm 1 ±rpm
Deviation of speed measurement n > 300rpm 1 ±% 1 ±%
Deviation of speed measurement n < 300rpm 3 ±rpm 3 ±rpm
Stirring element fastening chuck chuck
Connection for ext. temperature sensor no PT1000
Temperature display no yes
Chuck range min. diameter 0.5 mm 0.5 mm
Chuck range max. diameter 10 mm 10 mm
Hollow shaft, inner diameter 11 mm 11 mm
Hollow shaft (push-through - when stopped) yes yes
Fastening on stand extension arm extension arm
Extension arm diameter 16 mm 16 mm
Extension arm length 220 mm 220 mm
Torque display no yes
Nominal torque 0.6 Nm 0.6 Nm
Torque measurement no trend
deviation of torque measurement I x 6 ±Ncm
Timer no yes
Timer display no TFT
Time setting range x 1 - 6000 min
Temperature measuring range min. x -10°C
Temperature measuring range max. x +350°C
Temperature measurement resolution x 0.1 K
Accuracy of temperature measurement x ±0.5 + tolerance PT1000 (DIN IEC 751 Class A) K
Limit deviation temperature sensor x ≤ ±(0.15 + 0.002xITI) K
housing material alu-cast coating / thermoplastic polymer alu-cast coating / thermoplastic polymer
communication distance (depend onbuilding) max. x 150 m
Dimensions (W x H x D) 86 x 248 x 208 mm 86 x 267 x 230 mm
Weight 4.4 kg 4.7 kg
Permissible ambient temperature 5 - 40°C 5 - 40°C
Permissible relative humidity 80% 80%
Protection class according to DIN EN 60529 IP 40 IP 40
USB interface no yes
RS 232 interface no yes
Voltage 230 / 115 / 100V 230 / 115 / 100V
Frequency 50/60 Hz 50/60 Hz
Power input 176 W 176 W

 


Mixere universale electronice de performanta pentru agitarea lichidelor de pana la 100 de litri (H2O) si vascozitate maxima de 70.000 mPa.
:: Viteza / turatie 1300 RPM

Agitator universal electronic cu rotatie reversibila de mare performanta pentru medii vascoase

Powerfull overhead stirrer :: Model EUROSTAR 100 digital si Model EUROSTAR 100-Control


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

Eurostar 100 Control Agitator mecanic de performanta adaptat cu un controler detasabil pentru operare wireless si un display digital TFT.
Ajusta automat viteza cu ajutorul unui microprocesor in domeniul de 0/30 rpm .. 1300 rpm.
Agitatorul vine integrat cu o interfata RS232 si USB pentru controlul si documentarea parametrilor.
Torsiunea afisata pentru masurarea schimbarilor de vascozitate in timp real.
Circuitele de siguranta integrate asigura o inchidere automata in cazul supraincarcarii sistemului.
Comparatia in continuu a vitezei tijei de agitare cu valoare dorita a vitezei pentru mentinerea acesteia si ajustarea automata a variatiilor; acest lucru va asigura o viteza constanta chiar si la schimbarea vascozitatii probei.
Avantaje
functii programabile
interval de operare
functie timer cronometric
circuit integrat de siguranta ajustabil
viteza ajustabila la infinit
protectie la supraincarcare
operare silentioasa
afisaj coduri de eroare

Eurostar 100 Digital Agitator mecanic puternic pentru aplicatii cu fluide vascoase.
Cantitatea maxima de lichid agitata este de 100 lit.(H2O)
Sistem de control automat a vitezei cu ajutorul microprocesorului de control in domeniul de 0/30 – 1300 rpm.
Circuitele integrate de siguranta asigura o inchidere automata in conditii de supraincarcare.
Compararea in continuu a vitezei tijei cu viteza dorita pentru mentinerea valorii constante si ajustarea automata a variatiilor; acest lucru va asigura o viteza constanta chiar si la schimbarile vascozitatii probei
Avantaje
display digital pentru afisarea vitezei
viteza ajustabila la infinit
protectie la supraincarcare
operare pe termen scurt la supraincarcare
operare silentioasa
afisaj coduri de eroare

 

Model EUROSTAR 100 Digital EUROSTAR 100 Control
Cantitatea maxima de lichid (H2O) 100 lit. 100 lit.
Vascozitate maxima 70,000 mPas 70,000 mPas
Putere motor intrare/iesire 186 / 136 W 186 / 136 W
Timpul operare ON permis 100% 100%
Domeniul de viteza 0/30 – 1300 rpm 0/30 – 1300 rpm
Torsiune max. la axul de agitare 100 Ncm 100 Ncm
Afisaj LED TFT
Directie reversibila de rotatie nu da
Operare intermitenta nu da
Interfata sonda temperatura nu PT 1000
Mandrina de strangere / prindere 0.5 – 10 mm 0.5 – 10 mm
Transmisie cu arbore tubular da da
Masurarea cuplului nu da
Timer nu da
Temperatura nu da
Domeniu masurare a temperaturii -10 .. 350 °C
Dimensiune W x D x H 86 x 208 x 248 mm 86 x 230 x 267 mm
Greutate 4.4 kg 4.7 kg
Temperatura de operare 5 – 40 °C 5 – 40 °C
Umiditatea relative permisa 80% 80%
Clasa de protectie DIN EN 60529 IP 40 IP 40
Interfata USB / RS 232 nu da
Alimentare 230 V50/60 Hz 230 V50/60 Hz
Cod.Produs 4238100 4028500

 

Main features
Powerful laboratory stirrer designed with a removable wireless controller and a digital TFT display.
It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 1300 rpm.
The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters.
An integrated torque trend display is provided for the measurement of viscosity changes.
Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions.
Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically.
This guarantees a constant speed even with changes in viscosities of the sample.
Multilingual TFT display
Programmable functions
Integrated temperature measurement
Interval operation
Reverse function
Timer function
Adjustable safety circuit
Locked function
Infinitely adjustable speed
Push-through agitator shafts
Overload protection
Short-term overload operation
Quiet operation
Error code Display
H 67.60 temperature sensor and WH 11 WiCo holder included in delivery

Technical Data

Model EUROSTAR 100 Digital EUROSTAR 100 Control
Stirring quantity max. per stirring position (H2O) 100 l 100 l
Motor rating input 186 W 174 W
Motor rating output 136 W 142 W
Motor principle Brushless DC Brushless DC
Speed display 7 segment LED TFT
Speed range 0/30 - 1300 rpm 0/30 - 1300 rpm
Reversible direction of rotation no yes
Intermittent operation no yes
Viscosity max. 70000 mPas 70000 mPas
Output max. at stirring shaft 136 W 136 W
Permissible ON time 100 % 100 %
Torque max. at stirring shaft 100 Ncm 100 Ncm
Speed control stepless stepless
Setting accuracy speed 1 ±rpm 1 ±rpm
Deviation of speed measurement n > 300rpm 1 ±% 1 ±%
Deviation of speed measurement n < 300rpm 3 ±rpm 3 ±rpm
Stirring element fastening chuck chuck
Connection for ext. temperature sensor x PT1000
Temperature display x yes
Chuck range min. diameter 0.5 mm 0.5 mm
Chuck range max. diameter 10 mm 10 mm
Hollow shaft, inner diameter 11 mm 11 mm
Hollow shaft (push-through - when stopped) yes yes
Fastening on stand extension arm extension arm
Extension arm diameter 16 mm 16 mm
Extension arm length 220 mm 220 mm
Torque display x yes
Nominal torque 1 Nm 1 Nm
Torque measurement x trend
deviation of torque measurement I no 6 ±Ncm
Timer no yes
Timer display x TFT
Time setting range x 1 - 6000 min
Temperature measuring range min. x -10 °C
Temperature measuring range max. x +350 °C
Temperature measurement resolution x 0.1 K
Accuracy of temperature measurement x ±0.5 + tolerance PT1000 (DIN IEC 751 Class A) K
Limit deviation temperature sensor x < ± (0.15 + 0.002xITI) K
housing material alu-cast coating / thermoplastic polymer alu-cast coating / thermoplastic polymer
communication distance (depend onbuilding) max. x 150 m
Dimensions (W x H x D) 86 x 248 x 208 mm 86 x 267 x 230 mm
Weight 4.4 kg 4.7 kg
Permissible ambient temperature 5 - 40 °C 5 - 40 °C
Permissible relative humidity 80 % 80 %
Protection class according to DIN EN 60529 IP 40 IP 40
USB interface no yes
RS 232 interface no yes
Analog output no no
Voltage 230 / 115 / 100 V 230 / 115 / 100 - 115 / 100 V
Frequency 50/60 Hz 50/60 Hz
Power input 186 W 186 W

 


Agitatoare de mare viteza pentru agitarea lichidelor de pana la 100 de litri (H2O) si vascozitate maxima de 100.000 mPa.
Viteza / turatie 2200 RPM

Agitator universal electronic de mare viteza pentru medii vascoase

Powerfull overhead stirrer :: Model EUROSTAR 200 digital si Model EUROSTAR 200-Control


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

EuroStar 200 Control este un agitator mecanic performant puternic pentru aplicatii cu probe foarte vascoase (max 100.000 mPa) si cantitati de pana la 100 l (H2O), proiectat cu un controler wireless detasabil si un display digital TFT.
Agitatorul ajusteaza automat viteza cu unui microprocesor in domeniul de 0/6 – 2000 rpm.
Vine echipat cu o interfata RS232 si USB pentru controlul si documentarea parametrilor.
Torsiunea este afisata pentru masurarea schimbarilor de vascozitate.
Circuitele de siguranta instalate asigura o inchidere automata in cazul supraincarcarii sistemului.
Se realizeaza compararea continua a vitezei actuale cu valoarea setata a vitezei pentru mentinerea acesteia si ajustarea automata a variatiilor asigurand o viteza constanta chiar si la schimbarea vascozitatii probei

Avantaje
Afisaj TFT
Functii programabile
Masurare de temperatura incorporata
Interval de operare
Functie timer cronometric
Circuit de siguranta ajustabil
Viteza ajustabila la infinit
Protectie la supraincarcare
Operare silentioasa
Afisaj coduri de eroare
Functie de setare / blocare a meniului

 

Model EUROSTAR 200 Control EUROSTAR 200 Digital
Cantitatea maxima de lichid(H2O) 100 l 100 l
Putere motor intrare 130 W 130 W
Putere motor iesire 84 W 84 W
Tip motor fara perii DC fara perii DC
Afisaj viteza TFT 7 segmente LED
Domeniu de viteza 0/6 - 2000 rpm 0/6 - 2000 rpm
operare intermitenta da x
Vascozitate maxima 100000 mPas 100000 mPas
Putere maxima tija de agitare 84 W 84 W
Timpul operare ON permis 100 % 100 %
Torsiune max. la axul de agitare 200 Ncm 200 Ncm
Torsiune prima 200 Ncm 200 Ncm
Torsiune a doua 40 Ncm 40 Ncm
Viteza prima la 50 Hz 6 - 400 rpm 6 - 400 rpm
Viteza a doua la 50 Hz 30 - 2000 rpm 30 - 2000 rpm
Viteza prima la 60 Hz 6 - 400 rpm 6 - 400 rpm
Viteza a doua la 60 Hz 30 - 2000 rpm 30 - 2000 rpm
Control viteza stepless stepless
Ajustare precizie de viteza 1 ±rpm 1 ±rpm
Abatere viteza masurata n > 300 rpm 1 ±% 1 ±%
Abatere viteza masurata n < 300 rpm 3 ±rpm 3 ±rpm
Mandrina de strangere / prindere mandrina mandrina
Conexiune pentru senzor de temperatura PT1000 x
Masurare temperatura da x
Diametru cuplare Ø10 mm Ø10 mm
Diametru min. Mandrina 0.5 mm 0.5 mm
Diametru max. Mandrina 10 mm 10 mm
Stand de prindere brat extensie brat extensie
Diametru brat de extensie 16 mm 16 mm
Lungime brat de extensie 220 mm 220 mm
Afisaj torsiune da no
Torsiune nominala 2 Nm 2 Nm
masurare torsiune trend x
Deviatie a masurarii torsiunii I 20 ±Ncm x
Deviatia a masurarii vitezei II 6 ±Ncm x
Timer cronometric da x
Afisaj timer TFT x
Timer 1 - 6000 min x
Temperatura minima masurata -10°C x
Temperatura maxima masurata +350°C x
Rezolutie masurare temperatura 0.1 K x
Acuratete masurare temperatura ±0.5 + toleranta sonda PT1000 (DIN IEC 751 Class A)K x
Limita de abatere senzorul de temperatura ≤ ± (0.15 + 0.002xITI) K x
Material carcasa Aluminiu acoperit cu vopsea / polimer termoplastic Aluminiu acoperit cu vopsea / polimer termoplastic
Distanta de comunicare wireless max. 150 m x
Dimensiune W x D x H 91 x 297 x 231 mm 91 x 274 x 209 mm
Greutate 4.9 kg 4.6 kg
Temperatura ambianta permisa 5 - 40°C 5 - 40°C
Umiditate rel. permisa 80 % 80 %
Clasa de protectie DIN EN 60529 IP 40 IP 40
Interfata USB / RS 232 da x
Alimentare 230 / 100 - 115 / 100 V 230 / 100 - 115 / 100 V
Putere 130 W 130 W
Cod.Produs 0003992000 0003990000

 

Main features / EUROSTAR 200 control
Extremely powerful laboratory stirrer for highly viscous applications and intensive mixing for quantities up to 100 l (H2O)
It is designed with a removable wireless controller and a digital TFT display
It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/6 - 2000 rpm (two speed ranges)
The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters
An integrated torque trend display is provided for the measurement of viscosity changes
Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions
Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically
This guarantees a constant speed even with changes in viscosities of the sample
Multilingual TFT display
Programmable functions
Integrated temperature measurement
Interval operation
Timer function
Adjustable safety circuit
Locked function
Infinitely adjustable speed
Push-through agitator shafts
Overload protection
Short-term overload operation
Slim casing
Quiet operation
Error code display
H 67.60 temperature sensor and WH 11 WiCo holder included in delivery

Technical Data

Model EUROSTAR 200 control EUROSTAR 200 digital
Stirring quantity max. per stirring position (H2O) 100 l 100 l
Motor rating input 130 W 130 W
Motor rating output 84 W 84 W
Motor principle Brushless DC Brushless DC
Speed display TFT 7 segment LED
Speed range 0/6 - 2000 rpm 0/6 - 2000 rpm
Intermittent operation yes no
Viscosity max. 100000 mPas 100000 mPas
Output max. at stirring shaft 84 W 84 W
Permissible ON time 100 % 100 %
Torque max. at stirring shaft 200 Ncm 200 Ncm
torque I max. 200 Ncm 200 Ncm
torque II max. 40 Ncm 40 Ncm
Speed range I (50 Hz) 6 - 400 rpm 6 - 400 rpm
Speed range II (50 Hz) 30 - 2000 rpm 30 - 2000 rpm
Speed range I (60 Hz) 6 - 400 rpm 6 - 400 rpm
Speed range II (60 Hz) 30 - 2000 rpm 30 - 2000 rpm
Speed control stepless stepless
Setting accuracy speed 1 ±rpm 1 ±rpm
Deviation of speed measurement n > 300rpm 1 ±% 1 ±%
Deviation of speed measurement n < 300rpm 3 ±rpm 3 ±rpm
Stirring element fastening chuck chuck
Connection for ext. temperature sensor PT1000 x
Temperature display yes x
Plug-in coupling Ø10 mm Ø10 mm
Chuck range min. diameter 0.5 mm 0.5 mm
Chuck range max. diameter 10 mm 10 mm
Hollow shaft, inner diameter 10.3 mm 10.3 mm
Hollow shaft (push-through - when stopped) yes yes
Fastening on stand extension arm extension arm
Extension arm diameter 16 mm 16 mm
Extension arm length 220 mm 220 mm
Torque display yes no
Nominal torque 2 Nm 2 Nm
Torque measurement trend x
deviation of torque measurement I 20 ±Ncm x
deviation of speed measurement II 6 ±Ncm x
Timer yes x
Timer display TFT x
Time setting range 1 - 6000 min x
Temperature measuring range min. -10°C x
Temperature measuring range max. +350°C x
Temperature measurement resolution 0.1 K x
Accuracy of temperature measurement ±0.5 + tolerance PT1000 (DIN IEC 751 Class A) K x
Limit deviation temperature sensor ≤ ± (0.15 + 0.002xITI) K x
housing material alu-cast coating / thermoplastic polymer alu-cast coating / thermoplastic polymer
communication distance (depend onbuilding) max. 150 m x
Dimensions (W x H x D) 91 x 297 x 231 mm 91 x 274 x 209 mm
Weight 4.9 kg 4.6 kg
Permissible ambient temperature 5 - 40°C 5 - 40°C
Permissible relative humidity 80 % 80 %
Protection class according to DIN EN 60529 IP 40 IP 40
USB interface yes no
RS 232 interface yes no
Analog output no no
Voltage 230 / 100 - 115 / 100 V 230 / 100 - 115 / 100 V
Frequency 50/60 Hz 50/60 Hz
Power input 130 W 130 W

 


Agitatoare programabil multifunctional pentru agitarea lichidelor foarte vascoase de pana la 100 de litri (H2O) / vascozitate pana la 150.000 mPa.
Viteza / turatie 530 RPM

Agitator electronic programabil de mare viteza pentru lichide foarte vascoase

Powerfull overhead stirrer :: Model EUROSTAR 200 P4


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

EuroStar 200 P4 Control Agitator mecanic vertical multifuctional programabil extrem de puternic pentru aplicatii cu probe foarte vascoase si cantitati de pana la 100 lit.(H2O), operare cu un controler wireless detasabil cu un display digital TFT incorporat
Agitatorul ajusteaza automat viteza cu ajutorul unui microprocesor in domeniul de 0/4 – 530 rpm.
Interfata RS232 si USB pentru controlul si documentarea parametrilor.
Afisare valoare torsiunea pentru masurarea schimbarilor de vascozitate.
Circuitele de siguranta integrate asigura o inchidere automata in cazul supraincarcarii agitatorului.
Compararea continua a vitezei actuale cu valoarea setata a vitezei pentru mentinerea acesteia si ajustarea automata a variatiilor ce va garanta o viteza constanta chiar si la schimbarea vascozitatii probei

Avantaje
Afisaj TFT
Functii programabile
Masurare de temperatura incorporata
Interval de operare
Functie timer cronometric
Circuit de siguranta ajustabil
Viteza ajustabila la infinit
Protectie la supraincarcare
Operare silentioasa
Afisaj coduri de eroare
Functie de setare / blocare a meniului

 

Model EUROSTAR 200 control P4
Cantitatea maxima de lichid (H2O) 100 l
Putere motor intrare 134 W
Putere motor iesire 76 W
Tip motor fara perii DC
Afisaj viteza TFT
Domeniu de viteza 0/4 - 530 rpm
operare intermitenta da
Vascozitate maxima 150000 mPas
Putere maxima tija de agitare 76 W
Timpul operare ON permis 100 %
Torsiune max. la axul de agitare 660 Ncm
Torsiune prima 660 Ncm
Torsiune a doua 130 Ncm
Viteza prima la 50 Hz 4 - 108 rpm
Viteza a doua la 50 Hz 16 - 530 rpm
Viteza prima la 60 Hz 4 - 108 rpm
Viteza a doua la 60 Hz 16 - 530 rpm
Control viteza fara trepte
Ajustare precizie de viteza 1 ±rpm
Abatere viteza masurata n > 300 rpm 1 ±%
Abatere viteza masurata n < 300 rpm 3 ±rpm
Dispozitiv de strangere / prindere mandrina
Conexiune pentru senzor de temperatura PT1000
Afisaj t emperatura da
Diametru min. Mandrina Ø 0.5 mm
Diametru max. Mandrina Ø 10 mm
Tip arbora tubular impingere
Suport de prindere brat de extensie
Diametru brat de extensie 16 mm
Lungime brat de extensie 220 mm
Afisaj torsiune da
Torsiune nominala 6.6 Nm
Masurare torsiune trend
Deviatie a masurarii torsiunii I 60 ±Ncm
Deviatie a masurarii torsiunii II 10 ±Ncm
Timer cronometric da
Afisaj timer TFT
Timere programabil 1 - 6000 min
Temperatura minima masurata -10 °C
Temperatura maxima masurata +350 °C
Temperature measurement resolution 0.1 K
Rezolutie masurare temperatura ±0.5 + toleranta PT1000 (DIN IEC 751 Class A) K
Limita de abatere senzorul de temperatura ≤ ± (0.15 + 0.002xITI) K
Material carcasa alu-cast coating / thermoplastic polymer
Distanta de comunicare wireless 150 m
Dimensiune W x H x D 91 x 379 x 231 mm
Greutate 5.8 kg
Temperatura ambianta permisa 5 - 40 °C
Umiditate rel. permisa 80 %
Clasa de protectie DIN EN 60529 IP 40
Interfata USB si RS 232
Alimentare 230 / 100 - 115 V 50/60 Hz
Putere 134 W

 

Main features / EUROSTAR 200 control P4
Extremely powerful laboratory stirrer for highly viscous applications for quantities up to 100 l (H2O).
It is designed with a removable wireless controller and a digital TFT display.
It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/4 - 530 rpm (two speed ranges).
The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters.
An integrated torque trend display is provided for the measurement of viscosity changes.
Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions.
Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically.
This guarantees a constant speed even with changes in viscosities of the sample.
Multilingual TFT display
Programmable functions
Integrated temperature measurement
Interval operation
Timer function
Adjustable safety circuit
Locked function
Infinitely adjustable speed
Overload protection
Short-term overload operation
Slim casing
Quiet operation
Error code display
H 67.60 temperature sensor and WH 11 WiCo holder included in delivery

Technical Data

Model EUROSTAR 200 control P4
Stirring quantity max. per stirring position (H2O) 100 l
Motor rating input 134 W
Motor rating output 76 W
Motor principle Brushless DC
Speed display TFT
Speed range 0/4 - 530 rpm
Intermittent operation yes
Viscosity max. 150000 mPas
Output max. at stirring shaft 76 W
Permissible ON time 100 %
Torque max. at stirring shaft 660 Ncm
torque I max. 660 Ncm
torque II max. 130 Ncm
Speed range I (50 Hz) 4 - 108 rpm
Speed range II (50 Hz) 16 - 530 rpm
Speed range I (60 Hz) 4 - 108 rpm
Speed range II (60 Hz) 16 - 530 rpm
Speed control stepless
Setting accuracy speed 1 ±rpm
Deviation of speed measurement n > 300rpm 1 ±%
Deviation of speed measurement n < 300rpm 3 ±rpm
Stirring element fastening chuck
Connection for ext. temperature sensor PT1000
Temperature display yes
Chuck range min. diameter 0.5 mm
Chuck range max. diameter 10 mm
Hollow shaft (push-through - when stopped) no
Fastening on stand extension arm
Extension arm diameter 16 mm
Extension arm length 220 mm
Torque display yes
Nominal torque 6.6 Nm
Torque measurement trend
deviation of torque measurement I 60 ±Ncm
deviation of speed measurement II 10 ±Ncm
Timer yes
Timer display TFT
Time setting range 1 - 6000 min
Temperature measuring range min. -10 °C
Temperature measuring range max. +350 °C
Temperature measurement resolution 0.1 K
Accuracy of temperature measurement ±0.5 + tolerance PT1000 (DIN IEC 751 Class A) K
Limit deviation temperature sensor ≤ ± (0.15 + 0.002xITI) K
housing material alu-cast coating / thermoplastic polymer
communication distance (depend onbuilding) max. 150 m
Dimensions (W x H x D) 91 x 379 x 231 mm
Weight 5.8 kg
Permissible ambient temperature 5 - 40 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 40
USB interface yes
RS 232 interface yes
Voltage 230 / 100 - 115 V
Frequency 50/60 Hz
Power input 134 W

 

mixer_reactiv

Agitatoare programabil multifunctional pentru agitarea lichidelor foarte vascoase de pana la 20 de litri (H2O) / vascozitate pana la 10.000 mPa.
Viteza / turatie 6000 RPM

Agitator electronic programabil de mare viteza pentru lichide foarte vascoase

High speed digital overhead stirrer :: Model EUROSTAR 20HS digital


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

EUROSTAR 20 high speed digital Agitator mecanic de viteza inalta pana la 6000 RPM proiectat pentru amestecarea a pana la 20 lit. de lichid (H2O).
Controleaza si ajusta automat viteza turatie in domeniul de 0/150 – 6000 rpm.
Circuitele de siguranta instalate asigura o inchidere automata in cazul unor conditii de supraincarcare.
O comparatie in continuu a vitezei tijei de agitare cu viteza dorita este mentinuta; ajustarile sunt facute automat; acest lucru garanteza o viteza optima si constanta chiar si cu schimbari ale vascozitatii produsului
Avantaje
display digital pentru afisarea vitezei
viteza ajustabila la infinit
protectie la supraincarcare
operatia de incarcare pe termen scurt
operare silentioasa
afisaj coduri de eroare

 

Model EUROSTAR 20 high speed digital
Cantitatea maxima de lichid (H2O) 20 lit.
Putere motor intrare 176 W
Putere motor iesire 125 W
Tip motor fara perii DC
Afisaj viteza 7 segment LED
Domeniu de viteza 0/150 - 6000 rpm
Vascozitate maxima 10000 mPas
Putere maxima tija de agitare 125 W
Timpul operare ON permis 100 %
Torsiune max. la axul de agitare 20 Ncm
Control viteza stepless
Ajustare precizie de viteza 1 ±rpm
Abatere viteza masurata n > 300rpm 1 ±%
Abatere viteza masurata n < 300rpm 3 ±rpm
Dispozitiv de strangere / prindere mandrina
Suport de prindere brat de extensie
Diametru brat de extensie 16 mm
Lungime brat de extensie 220 mm
Afisaj torsiune 0.2 Nm
Material carcasa alu-cast coating / thermoplastic polymer
Dimensiune W x H x D 86 x 325 x 208 mm
Greutate 5.3 kg
Temperatura ambianta permisa 5 - 40 °C
Umiditate rel. permisa 80 %
Clasa de protectie DIN EN 60529 IP 40
Alimentare 230 / 115 / 100 V 50/60 Hz
Putere 176 W

 

Main features / EUROSTAR 200 control P4
High speed laboratory stirrer designed for intensive stirring tasks for quantities up to 20 l (H2O)
It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/150 - 6000 rpm
Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions
Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically
This guarantees a constant speed even with changes in viscosities of the sample
The included precision shaft is 280 mm long and has a maximum immersion depth of 220 mm
Digital speed display
Infinitely adjustable speed
Cone seat for precision shaft
Overload protection
Short-term overload operation
Slim casing
Quiet operation
Error code display

Technical Data

Model EUROSTAR 20 high speed digital
Stirring quantity max. per stirring position (H2O) 20 lit.
Motor rating input 176 W
Motor rating output 125 W
Motor principle Brushless DC
Speed display 7 segment LED
Speed range 0/150 - 6000 rpm
Viscosity max. 10000 mPas
Output max. at stirring shaft 125 W
Permissible ON time 100 %
Torque max. at stirring shaft 20 Ncm
Speed control stepless
Setting accuracy speed 1 ±rpm
Deviation of speed measurement n > 300rpm 1 ±%
Deviation of speed measurement n < 300rpm 3 ±rpm
Stirring element fastening special output shaft
Fastening on stand extension arm
Extension arm diameter 16 mm
Extension arm length 220 mm
Nominal torque 0.2 Nm
Timer no
housing material alu-cast coating / thermoplastic polymer
Dimensions (W x H x D) 86 x 325 x 208 mm
Weight 5.3 kg
Permissible ambient temperature 5 - 40 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 40
Voltage 230 / 115 / 100 V
Frequency 50/60 Hz
Power input 176 W

 


Agitator electromecanic digital cu tije pentru volume pana la 20 de litri (H2O) / vascozitate pana la 10.000 mPa.
Viteza / turatie 2000 RPM

Agitator electro-mecanic cu turbina

Mechanical overhead stirrer :: Model RW 20 digital


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

 

Model RW 20 digital
Cantitatea maxima de lichid (H2O) 20 l
Putere motor intrare 70 W
Putere motor iesire 35 W
Afisaj viteza LED
Domeniu de viteza 60 - 2000 rpm
Vascozitate maxima 10000 mPas
Putere maxima tija de agitare 26 W
Timpul operare ON permis 100 %
Torsiune max. la axul de agitare 150 Ncm
Torsiune max. la axul de agitare la 60 1/min (overload) 300 Ncm
Torsiune max. la axul de agitare la 100 1/min 150 Ncm
Torsiune max. la axul de agitare la 1.000 1/min 24 Ncm
Domeniu de viteza I (50 Hz) 60 - 500 rpm
Domeniu de viteza II (50 Hz) 240 - 2000 rpm
Domeniu de viteza I (60 Hz) 72 - 600 rpm
Domeniu de viteza II (60 Hz) 288 - 2400 rpm
Control viteza stepless
Ajustare precizie de viteza 1 ±rpm
Abatere viteza masurata 30 ±rpm
Dispozitiv de strangere / prindere mandrina
Afisaj temperatura no
Diametru mandrina pt. prindere Ø0.5 .. Ø10 mm
Diametru interior arbor tubular 10.5 mm
Suport de prindere brat de extensie
Diametru brat de extensie 13 mm
Lungime brat de extensie 160 mm
Afisaj torsiune no
Torsiune nominala 1.5 Nm
Timer no
Dimensiune W x H x D 88 x 294 x 212 mm
Greutate 3.1 kg
Temperatura de operare 5 - 40 °C
Umiditate rel. permisa 80 %
Clasa de protectie DIN EN 60529 IP 20
Alimentare 220 - 240 / 100 - 115 V 50/60 Hz
Putere 72 W

 

Advantages
With digital display
Robust, slimline, ergonomic design
Technical improvements on the trusted RW 20 series designs
With constant power-drive
Two speed ranges for universal use from 60 - 2.000 rpm
Push-through agitator shafts (only when stationary)
For stirring quantities of up to 20 l (H2O)

Technical Data

Model RW 20 digital
Stirring quantity max. per stirring position (H2O) 20 l
Motor rating input 70 W
Motor rating output 35 W
Speed display LED
Speed range 60 - 2000 rpm
Viscosity max. 10000 mPas
Output max. at stirring shaft 26 W
Permissible ON time 100 %
Torque max. at stirring shaft 150 Ncm
Torque max. at stirring shaft at 60 1/min (overload) 300 Ncm
Torque max. at stirring shaft at 100 1/min 150 Ncm
Torque max. at stirring shaft at 1.000 1/min 24 Ncm
Speed range I (50 Hz) 60 - 500 rpm
Speed range II (50 Hz) 240 - 2000 rpm
Speed range I (60 Hz) 72 - 600 rpm
Speed range II (60 Hz) 288 - 2400 rpm
Speed control stepless
Setting accuracy speed 1 ±rpm
deviation of speed measurement 30 ±rpm
Stirring element fastening chuck
Temperature display no
Chuck range min. diameter 0.5 mm
Chuck range max. diameter 10 mm
Hollow shaft, inner diameter 10.5 mm
Hollow shaft (push-through - when stopped) yes
Fastening on stand extension arm
Extension arm diameter 13 mm
Extension arm length 160 mm
Torque display no
Nominal torque 1.5 Nm
Timer no
Dimensions (W x H x D) 88 x 294 x 212 mm
Weight 3.1 kg
Permissible ambient temperature 5 - 40 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 20
Voltage 220 - 240 / 100 - 115 V 50/60 Hz
Power input 72 W

 


Agitator mixer electromecanic universal pentru volume pana la 80 de litri (H2O) / vascozitate pana la 50.000 mPa.
Viteza / turatie 1400 RPM

Agitator puternic electromecanic cu turbina

Powerful mechanically controlled stirrer :: Model RW 28 digital


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

 

Model RW 28 digital
Cantitatea maxima de lichid (H2O) 80 l
Putere motor intrare 220 W
Putere motor iesire 90 W
Afisaj viteza LED
Domeniu de viteza 60 - 1400 rpm
Vascozitate maxima 50000 mPas
Putere maxima tija de agitare 90 W
Timpul operare ON permis 100 %
Torsiune max. la axul de agitare 900 Ncm
Torsiune max. la axul de agitare la 60 1/min (overload) 1144 Ncm
Torsiune max. la axul de agitare la 100 1/min 900 Ncm
Torsiune max. la axul de agitare la 1.000 1/min 86 Ncm
Torsiune maxima de viteza I 900 Ncm
Torsiune maxima de viteza II 300 Ncm
Domeniu de viteza I (50 Hz) 60 - 400 rpm
Domeniu de viteza II (50 Hz) 240 - 1400 rpm
Domeniu de viteza I (60 Hz) 72 - 480 rpm
Domeniu de viteza II (60 Hz) 288 - 1680 rpm
Control viteza stepless
Ajustare precizie de viteza 1 ±rpm
Abatere viteza masurata 10 ±rpm
Dispozitiv de strangere / prindere mandrina
Afisaj temperatura 1 mm
Diametru mandrina pt. prindere 10 mm
Diametru interior arbor tubular 10.5 mm
Suport de prindere brat extensie
Diametru brat de extensie 16 mm
Lungime brat de extensie 145 mm
Torsiune nominala 9 Nm
Material carcasa Aluminiu acoperit cu vopsea / polimer termoplastic
Nivel de zgomot fara elemente 62.5 dB(A)
Dimensiune W x H x D 123 x 364 x 252 mm
Greutate 7.5 kg
Temperatura de operare 5 - 40 °C
Umiditate rel. permisa 80 %
Clasa de protectie DIN EN 60529 IP 40
Alimentare 220 - 240 / 115 / 100 V :: 50/60 Hz
Putere 220 W

 

Main Features
Powerful, mechanically controlled laboratory stirrer designed for highly viscous applications for quantities up to 80 l (H2O).
It is suitable for intensive mixing for use in laboratories and pilot plants.
The stirrer comes equipped with a protection for overheating of the motor by means of self-locking temperature limiter.
Additionally, to secure bowls, a stirring shaft protection and clamping fixture are optionally available.
Digital speed display
Infinitely adjustable speed from 60 to 1400 rpm in two speed ranges
Push-through agitator shafts
Overload protection
Error code display
Robust, ergonomic design
Quiet operation
With constant power-drive

Technical Data

Model RW 28 digital
Stirring quantity max. per stirring position (H2O) 80 l
Motor rating input 220 W
Motor rating output 90 W
Speed display LED
Speed range 60 - 1400 rpm
Viscosity max. 50000 mPas
Output max. at stirring shaft 90 W
Permissible ON time 100 %
Torque max. at stirring shaft 900 Ncm
Torque max. at stirring shaft at 60 1/min (overload) 1144 Ncm
Torque max. at stirring shaft at 100 1/min 900 Ncm
Torque max. at stirring shaft at 1.000 1/min 86 Ncm
torque I max. 900 Ncm
torque II max. 300 Ncm
Speed range I (50 Hz) 60 - 400 rpm
Speed range II (50 Hz) 240 - 1400 rpm
Speed range I (60 Hz) 72 - 480 rpm
Speed range II (60 Hz) 288 - 1680 rpm
Speed control stepless
Setting accuracy speed 1 ±rpm
deviation of speed measurement 10 ±rpm
Stirring element fastening chuck
Chuck range min. diameter 1 mm
Chuck range max. diameter 10 mm
Hollow shaft, inner diameter 10.5 mm
Hollow shaft (push-through - when stopped) yes
Fastening on stand extension arm
Extension arm diameter 16 mm
Extension arm length 145 mm
Nominal torque 9 Nm
housing material alu-cast coating / thermoplastic polymer
Noise without element 62.5 dB(A)
Dimensions (W x H x D) 123 x 364 x 252 mm
Weight 7.5 kg
Permissible ambient temperature 5 - 40 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 40
Analog output no
Voltage 220 - 240 / 115 / 100 V :: 50/60 Hz
Power input 220 W

 


Agitator mixer electromecanic universal pentru volume pana la 200 de litri (H2O) / vascozitate pana la100.000 mPa.
Viteza / turatie 1300 RPM

Agitator puternic electromecanic cu turbina

Powerful mechanically controlled stirrer :: Model RW 48 digital


Pret : la cerere


Livrare: 7 - 10 zile lucratoare


Certificat de conformitate


produsul poate fi achizitionat si prin SEAP


Made in EU


solicit oferta personalizata »

 

Model RW 47 digital
Cantitatea maxima de lichid (H2O) 200 l
Putere motor intrare 513 W
Putere motor iesire 370 W
Tip motor tri-fazic
Afisaj viteza LED
Domeniu de viteza 57 - 1300 rpm
Vascozitate maxima 100000 mPas
Putere maxima tija de agitare 300 W
Timpul operare ON permis 100 %
Torsiune max. la axul de agitare 3000 Ncm
Torsiune max. la axul de agitare la 60 1/min (overload) 4642 Ncm
Torsiune max. la axul de agitare la 100 1/min 3000 Ncm
Torsiune max. la axul de agitare la 1.000 1/min 285 Ncm
Torsiune maxima de viteza I 3000 Ncm
Torsiune maxima de viteza II 620 Ncm
Domeniu de viteza I (50 Hz) 57 - 275 rpm
Domeniu de viteza II (50 Hz) 275 - 1300 rpm
Control de viteza stepless
Ajustare precizie de viteza 1 ±rpm
Abatere viteza masurata 10 ±rpm
Ajustare precizie de viteza chuck
Diametru mandrina pt. prindere min. 3 mm / max.16 mm
Diametru interior arbor tubular 13 mm
Suport de prindere flange
Torsiune nominala 30 Nm
Material carcasa Aluminiu acoperit cu vopsea / polimer termoplastic
Dimensiune W x H x D 145 x 465 x 358 mm
Greutate 16 kg
Temperatura de operare 5 - 40 °C
Umiditate rel. permisa 80 %
Clasa de protectie DIN EN 60529 IP 54
Alimentare 3 x 400 / 3 x 230 V :: 50 Hz
Putere 513 W

 

Main Features
Extremely powerful, mechanically controlled laboratory stirrer designed for highly viscous applications for quantities up to 200 l (H2O).
It is suitable for intensive mixing for use in laboratories and pilot plants.
The stirrer comes equipped with a protection for overheating of the motor by means of self-locking temperature limiter.
Additionally, to secure bowls, a stirring shaft protection and clamping fixture are optionally available.
Digital speed display
Infinitely adjustable speed (57 - 1300 rpm) in two speed ranges
Overload protection
Error code display
Robust, ergonomic design
Quiet operation
With constant power-drive

Technical Data

Model RW 47 digital
Stirring quantity max. per stirring position (H2O) 200 l
Motor rating input 513 W
Motor rating output 370 W
Motor principle three-phase current
Speed display LED
Speed range 57 - 1300 rpm
Viscosity max. 100000 mPas
Output max. at stirring shaft 300 W
Permissible ON time 100 %
Torque max. at stirring shaft 3000 Ncm
Torque max. at stirring shaft at 60 1/min (overload) 4642 Ncm
Torque max. at stirring shaft at 100 1/min 3000 Ncm
Torque max. at stirring shaft at 1.000 1/min 285 Ncm
torque I max. 3000 Ncm
torque II max. 620 Ncm
Speed range I (50 Hz) 57 - 275 rpm
Speed range II (50 Hz) 275 - 1300 rpm
Speed control stepless
Setting accuracy speed 1 ±rpm
deviation of speed measurement 10 ±rpm
Stirring element fastening chuck
Chuck range min. diameter 3 mm
Chuck range max. diameter 16 mm
Hollow shaft, inner diameter 13 mm
Fastening on stand flange
Nominal torque 30 Nm
housing material alu-cast coating / thermoplastic polymer
clean room qualified no
explosion proofed no
Dimensions (W x H x D) 145 x 465 x 358 mm
Weight 16 kg
Permissible ambient temperature 5 - 40 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 54
Voltage 3 x 400 / 3 x 230 V :: 50 Hz
Power input 513 W

 

Produse corelate
pret_agitator_ax_vertical
Laboratory stirrers .. with / without heating .. more »

Agitatoare de laborator cu sau fara incalzire »

pret_amestecator_vertical
Laboratory Incubators ..more »

Incubatoare medicale si de laborator mai multe »

pret_agitator_mecanic_vertical
Peristaltic Tube Pumps .. more »

Pompe peristaltice detalii »

multilab_team

Solutions for science, industry and safety
Suntem bucurosi sa te ajutam ... Fie ca vrei sa comanzi si nu esti sigur care este cea mai buna alegere, sau vrei sa afli mai multe despre serviciile noastre, consultantii nostri Iti raspund la orice intrebare
Pentru orice detalii suplimentare tehnice sau comerciale sintem la dispozitia Dvs.
direct Tel. +4 021 312 7144 / 45
sau

service_reparatie

Superior Service MultiLab's aim is to differentiate ourselves and add value to our customers, by providing superior service throughout the sales and after-care processes :: Preventative Maintenance - Calibration - Repair - Validation .. more »
Centru service autorizat de producator Service - Mentenantei preventive - Reparati - Consumabile - Piese de schimb, pentru agitatoare, mixere, amestecatoare, omogenizatoare .. mai multe »

multilab_laboratories

*Important acest site este unul de prezentare! date tehnice; poze afisate si preturile sunt cu titlu informativ se pot schimba fara notificare prealabila! detalii »

All rights Reserved MultiLab© SRL Romania 2003 - 2017